Doosan 150W Wheeled Excavator Gear Pump: Technical Overview & User Guide
(Translated for global engineering professionals and equipment operators)
------
I. Product Positioning & Compatibility
1. Equipment Integration
• Doosan 150W Wheeled Excavator(15-ton class) typically employs agear pumpfor its primary hydraulic system, driving steering, boom/arm/bucket operations, and auxiliary functions.
• Key Applications:
• Municipal projects (pipeline laying, landscaping)
• Light earthmoving (grading, loading)
• Agricultural infrastructure (irrigation trench digging)
2. Technical Advantages of Gear Pumps
• Simplicity & Cost Efficiency:
• Fewer moving parts than piston pumps, reducing maintenance costs by 30%-40%.
• Ideal for budget-conscious users in low-to-medium duty cycles.
• Contamination Tolerance:
• Compatible with Doosan’s open-loop hydraulic systems (return filter rating ≤25μm), surviving harsh dust/debris environments.
• Speed Flexibility:
• Operates efficiently at engine RPM ranges (1,800–2,200 RPM), supporting rapid road transfers.
------
II. Key Technical Specifications (Industry Benchmarks)
(Note: Final parameters require verification from Doosan’s OEM manual.)
【表格】
Parameter Typical Range Doosan 150W Fitment Rationale
Displacement 20–50 mL/rev (tandem pump) Balances flow rate and energy consumption for light-duty tasks.
Rated Pressure 250–280 bar (3,625–4,060 psi) Lower than piston pumps (350+ bar), aligning with system load demands.
Max. Speed 3,000 RPM Exceeds engine RPM, allowing short-term overloads.
Port Connection SAE/ISO flange (direct-drive/coupling) Seamless integration with Doosan’s powertrain interface.
Seal Material NBR (Nitrile rubber) Resists mineral hydraulic oil (ISO VG46), with 5,000+ hours lifespan.
------
III. User Selection & Maintenance Guidelines
1. Optimal Selection Criteria
• Tandem Pump Priority:
• Simultaneously powers travel motors and work attachments, reducing hydraulic line complexity and leakage risks.
• Pressure Margin Design:
• Choose pumps rated ≥280 bar to prevent fatigue under frequent heavy lifts.
2. Maintenance Schedule & Troubleshooting
• Routine Care:
• Replace hydraulic filters every 250 hours; inspect coupling elastomers every 500 hours.
• Failure Warning Signs:
• Pressure Fluctuations: Indicate internal leakage (gears worn); replacement cost: $800–$1,200.
• Abnormal Noise: Signals imminent bearing/shaft failure—shut down immediately.
------
IV. Competitor Analysis & Alternative Solutions
1. Gear Pump vs. Piston Pump【表格】
Metric Gear Pump (Doosan 150W Fit) Piston Pump (High-Load Scenarios)
Initial Cost Low ($300–$600) High ($1,500–$3,000)
Efficiency 75%–80% (light loads) 90%–95% (full loads)
Lifespan 5,000–8,000 hrs (non-continuous) 10,000+ hrs (with precision filtration)
2. Recommended Alternative Brands
• Budget Option: Parker PGP Series (tandem pump, 28–42 mL/rev, plug-and-play with Doosan’s hydraulic circuit).
• Premium Upgrade: Bosch Rexroth A10V Series (variable displacement piston pump, requires system retrofit).