Aluminum Extrusion Temperature Measurement (2)
5 week agoSTRONG-GR-2512 infrared pyrometer technical parameters
Model |
STRONG-GR-2512 |
Measuring Range |
250 degC~1200 degC |
Detector |
InGaAs/InGaAs(Laminated InGaAs) |
1-color Wavelength |
1.7μm |
2-color Wavelength |
Wavelength1:(0.9~1.7)μm Wavelength 2:1.7μm |
Main Applications |
Hot rolled steel, wire rod, Non-ferrous metal processing, induction heating, galvanized wire |
Distance Coefficient |
30:1 |
Measuring Distance |
Standard focal length:adjustable from 0.35m to infinite;near focal length:0.15m~0.5m |
Measuring Accuracy |
±0.5%T(T is measured value) |
Resolution |
0.1 degC |
Repeat Accuracy |
±2 degC |
1-color Coefficient |
0.100~1.100,adjustable in 0.001 increment |
2-color Coefficient |
0.850~1.150,adjustable in 0.001 increment |
Response Time |
Fastest 5ms,5ms-99.99s adjustable |
Signal processing |
Peak value, valley value, average temperature value; Ambient temperature too high/low alarm; switch between one-color and two-color mode; power down protection. |
Output
|
Group1: Multiple analog outputs 16bit(4mA~20mA,0mA~20mA,0V~5V,0V~10V, switchable), output resolution 16bit, accurate to 0.1 degC, maximum current loop output load 600Ω,maximum current output load 10mA |
Gourp2: Analog outputs 4mA~20mA,resolution 16bit, accurate to 0.1 degC, maximum current loop output load 600Ω |
|
Alarms output: upper or lower temperature limit alarm;PhotoMOS relay (infinite service life) on resistance≤2Ω, maximum allowed voltage: AC60V or DC60V; maximum allowed current: 120mA; response time: 2ms |
|
PNP level output(current output 100mA,with overload protection.) |
|
RS485 output, with functions of parameters modification, data logging and inquiry |
|
Display Mode |
Industrial-grade self-luminous OLED display screen |
Power Input |
DC(20~30)V, with over voltage, over current and short circuit protection; Power consumption: 5W (24V@200mA) with built-in EMI wave filter, resistance to pulse group’s Interference: 2500VDC |
Warm up time |
With built-in 40 degC constant temperature heater, start temperature measurement within 10mins after power on. Assembled whole-process temperature compensation, temperature measurement accuracy is nearly unaffected by ambient temperature. |
Aiming Method |
Green visible aiming laser, eyepiece aiming,video aiming choose 1 |
Port |
Imported sealed plug and 12-core high-temperature shielded cable |
Operating Environment |
No water cooling:-20 degC~+60 degC,air purge pressure: 0.1MPa,flow rate: 6L/ min With water cooling:-20 degC~+200 degC,water cooling pressure: 0.2MPa,flow rate: 2L/min |
Protection Level |
IP65 |
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Changzhou Sijie Optoelectronics Technology Co.,Ltd.
- *Message:
-
Submit
Main Product:
Infrared Pyrometer,
Infrared Thermometer ,
Accuracy Pyrometer,
2-color Pyrometer,
Fixed Pyrometer,
Industrial Pyrometer
You May Also Like