Ⅰ[Product Name]Fetal attractor
Ⅱ、[specifications]55mm、65mm、70mm
Ⅲ、[Applicable scope] For clinical obstetrics and gynecology midwiferyuse。
Ⅳ、[Main structure and performance of the product]The fetal suction device consists of a suction rod and a suction bowl。This product is not sterile,Disinfectable and reusable.
Ⅴ、[ Usage]
1、This product should be used by a professional physician
2、 Before use,the fetalsuction device should be checked. Damaged or leaking products are prohibited. High temperature (110 C)disinfection or sterilization should be carried out before use,The surgeryfollows the obstetric delivery steps, The attractor is tightly attached to the tirehead,Connect an electricvacuum pump or 50-100ml syringe to the rubber tube of the suction handle (not less than 20cm in length)Slowly extract air, Generate negative pressure,Generally,100-150ml of air is drawn,Clamp rubber tube, It can form a suction force of 0.6-0.8Kg per square centimeter,Advance trial traction, If there is no slippage or air leakage,it can be combined with uterinecontractions and abdominal pressure,Slowly pull along the production axisdirection,After the fetal head is pulled out of the vaginal opening,Release the rubber tube and remove the suction cup.
Ⅵ、[Precautions for use]
1、Abnormalfetal position,headpelvicimbalance, birth canal obstruction, cervical cancer, uterine prolapse, or postoperative urinaryfistula surgery,Attractors should not be used.
2、Abnormal fetal head position,After becoming aregular employee, attraction technique.
3、 Suction capacity of suction device, It shouldbe determined basedon the height of the fetal head position,Excessive damage to the scalp, toos for slipping,Apply force evenly during traction,It should not be too large or too strong, and should be slowly pulled along theproduction axirection, Avoid shaking left and right by all means,To prevent detachment or damage to the scalp。
4、 Secondary traction detachment,other midwifery techniques shouldbe used。
5、 If the tumor on the fetal head is large after surgery,Sometimes scalp injuries, blisters, etc.may occur,observation and care should be taken,Take corresponding therapeutic measures.
6、After using the product,rinse all parts of theproduct with clean water first, Then wipe and disinfect all accessible areas with75% medical disinfectant alcoholor place the suction cup in a high temperature of 100 C for disinfection without deformation, After disinfection, air dry for later use.
Ⅶ、[Warning and reminder content]
1、Do not use if the fetal suction device is damaged or leaking.
2、Before use,check whether the suction cup and suction rod arefirmly connected, Is the three-way valve sensitive and ventilated.
3、The operator is responsible forany damage caused by improper use by professional physicians, Be carefu]not to have any residue or blockage inside the suction rod.
4、This product is used as a matching part for electric attractors,When using,please refer tothe manualof the electric suctiondevice for operation, Special attention should be paid to the setting of pressure.