Instructions
power switch
1. Switch to "ON" to turn on the power.
2. Switch to "OFF" to turn off the power and keep the clock at low power consumption. When the power is turned on the next time it switches to "0N", the clock will restore time and there is no need to reset time (if the power is turned off for a long time in 0FF mode, there may be a time minute error, which is a normal phenomenon).
After the switch is turned to the "ON" position, the vibration will wake up for a certain period of time; After being idle for 30 seconds, the time display will turn off.
When charging, the red light will light up, and when fully charged, the light will turn off.
Time settings
1. Double click the (H) key to enable clock settings. At this point, the clock will be displayed on the left, minutes will be displayed on the right, and both the clock and minutes will flash simultaneously.
2. Press and hold the (H) key to quickly increase the clock count (the number will automatically cycle between 0 and 24) and release to locate the current number; Short press once to jump.
3. Press and hold the (M) key to quickly increase the minute count (the number will automatically loop between 0 and 60), and release to locate the current number; Short press once to jump.
4. Double click the (H) key or wait for 10 seconds without any action to exit clock adjustment, and then start displaying the current time.
Countdown setting
1. Double click the (M) key to open the countdown adjustment. At this point, minutes will be displayed on the left and seconds will be displayed on the right. Minutes will flash and display 00:00.
2. Press and hold the (H) key to quickly increase the minute count (the number will automatically loop between 0 and 99) and release to locate the current number; Short press once to jump.
3. Press the (M) key to start the countdown; When the countdown status is 00:00, the clock emits a 10 second beep sound; At the same time, the light flashes and then returns to its previous state (if the countdown time is too long (such as 2 minutes or more), it will enter power-saving mode after 30 seconds, and the screen will not display the countdown until 1 minute before the countdown ends, and then the screen will light up).
Double clicking the M key or ending the countdown will exit the countdown mode and display the current time.
Lighting Settings
1. Press the (light) button to switch the light mode, in the order of constant light → breathing light → off; When the light keeps on, long press to achieve infinite dimming.
2. This product has a light memory function. When the light is turned off and turned on again, the brightness of the light remains the same as before it was turned off
| power supply method |
USB charging |
| Power supply |
Rechargeable Battery |
| Feature |
Newly-designed |