metal additive

Alloy additive is a block-shaped article formed by pressing pure metal powder and a flux with certain characteristics in a certain proportion after being uniformly mixed. Under the action of the flux, the pure metal powder can quickly melt in the melt, so as to achieve the purpose of adding metal elements. The additive not only has all the advantages of the master alloy, but also overcomes the disadvantages of high cost and inaccurate content when using master alloy.

Alloy additive is applied to non-ferrous plate, strip, foil, section and car industry, wire and cable making, and non-ferrous alloy ingots industry.

Usage And Dosage

1. After removing the scum on the surface of the molten pool, the additives are evenly put into the molten pool at the normal operating temperature (730-750°C), and then fully stirred for 5-10 minutes and then left standing for 5-10 minutes to get out of the furnace.

2. There is no need to weigh when using.

3. All plastic packaging is chlorine-free film, which can be directly put into the furnace without generating harmful gas.

4. The scum is removed from the furnace, and then the chemical composition is sampled and analyzed. If it is qualified, it will be poured in time.