Appliance injection molded parts

• Wall Thickness: Uniformity is critical for injection molding (typically 2-4mm).

• Draft Angles: Essential for ejecting parts from a mold (usually 1-3° per side).

• Ribs & Bosses: For adding strength and mounting points for PCBs/screws without thickening walls.

• Snap-Fits & Living Hinges: Can reduce part count and assembly time. Material choice is critical.

• Surface Finish: Texture (e.g., VDI 3400) hides mold lines and fingerprints. Options for painting, plating, or printing (silkscreen, pad print, laser marking).

• IP Rating (Ingress Protection): Specify if you need protection from dust/water (e.g., IP54, IP67). This affects seal design (gasket grooves) and assembly.

• EMI/RFI Shielding: Conductive coatings, metalized plastics, or internal metal liners may be required.

• Thermal Management: Ventilation slots, internal heat sink mounting, fan placement.

• UL/CE Compliance: Material must often meet specific flammability ratings (e.g., UL94 V-0).

 Key Applications

• Test & Measurement Equipment: Oscilloscopes, signal generators, data loggers.

• Medical & Laboratory Devices: Portable monitors, diagnostic tools, lab analyzers.

• Industrial Controls: HMI panels, sensor housings, controller units.

• Professional Audio/Video: Mixers, interfaces, broadcast equipment.

• Military & Aerospace: Ruggedized equipment cases (often to MIL-STD specs).

• Consumer Electronics: High-end prototypes, specialized devices.

• Home Appliance Plastic Accessories
• Automotive Plastic Accessories
• Furniture Plastic Fittings
• Daily Plastic Parts
• Other Plastic Parts
• Industrial Plastic Injection