Oil Separator 1625165712
3 month ago
Product Overview
Key Details:
-
Air Flow: Runs 15 to 20 cubic meters per minute, just depends on which model you go with.
-
Max pressure: Can handle up to 10 bar
-
Pressure Drop: Starts at 0.2 bar or less when new
-
Oil Removal: Catches over 99% of oil particles down to 0.1 micron in size
-
Connections: 1-inch NPT female threads
-
Body Material: Carbon steel with powder coating
-
Temp Range: Works from 5°C to 80°C
What It Does & Why It’s Reliable
Simple Add-On Protection
It’s an external unit that pipes into your existing air line. You don’t need to modify your compressor. Install it close to the compressor or near the equipment that needs the cleanest air.
How It Cleans the Air
Air spins inside the unit first, throwing larger oil droplets to the sides. Then the air passes through a special filter material that catches the finest oil mist. Collected oil drains out automatically through a small valve.
Built to Last
The steel housing is welded strongly to prevent leaks. The powder coating resists rust, which is good for damp workshop air. It comes with a sturdy bracket that handles vibration from nearby machinery.
Easy to Maintain
A pressure gauge on the side shows when the filter element is getting full. When the pressure drop gets too high, you just unscrew the bowl and replace the inner cartridge. The replacement elements are standard sizes we carry.
Compared to Other Options
Many basic in-line filters clog faster with heavy oil. Our separator handles more oil because the spinning action removes the bulk of it first. This means the fine filter inside lasts longer, saving you money on replacements.
Our Quality Focus
We make these in our ISO-certified factory. Every housing gets pressure-tested. We pay close attention to the welding and how the filter media is packed, so each unit performs the same way.
Where to Use It
Workshops & Garages
-
Paint spray booths, to get a cleaner finish
-
Air tools like impact wrenches and sanders
-
Sandblasting equipment
Small Factories
-
Protecting pneumatic controls on production machines
-
Air for packaging equipment
-
Textile or woodworking machinery
When Upgrading Your System
-
Old compressors that start passing more oil than they should
-
As a pre-filter before a sensitive instrument or a dryer
-
On portable compressors used at different job sites
Tougher Environments
-
Construction sites
-
Marine or mining workshops
-
Anywhere the compressor air is very oily or humid
Similar Video Recommendation
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Jiangxi Sange Filter Manufacturing Co., Ltd
- *Message:
-
Submit
Main Product:
Air Compressor Filters,
Construction Machinery Filters,
Generator Filters,
Heavy Duty Truck Filters,
Air Dryer ,
Air Compressor