1.27mmSeries20PHood Stroight Exit Split-CS02

2 month ago

5 0 

5 year

Product details

Huizhou Antenk Electronics Co., Ltd., an IATF16949:2016, ISO9001:2015 and ISO14001:2015 certified high-tech enterprise founded in 2007 with over 300 employees and a 10000 square meter Huizhou facility, proudly presents the 1.27mm Series 20P Hood Straight Exit Split. This IDC (Insulation Displacement Connector) is specifically designed for 1.27mm pitch flat ribbon cable with 20 contacts, featuring a straight exit hood and split construction for easy cable termination without wire stripping. The connector consists of a glass filled PBT or nylon 6/6 housing rated UL94 V0, a phosphor bronze contact with selective nickel or gold plating, and a robust hood that provides strain relief and polarization. The split design allows the hood to be assembled after cable termination. Key characteristics include contact resistance below 20 milliohms, insulation resistance of 1000 megohms minimum, dielectric withstanding voltage of 500V AC for 1 minute, current rating of 1A per contact, and an operating temperature range from -40 to +105 degrees Celsius. The IDC termination method ensures gas tight connections that resist oxidation and vibration. The product is RoHS and REACH compliant and UL recognized under E472792.

This 1.27mm series 20P hooded IDC connector is ideal for internal wiring in electronic devices requiring reliable, low profile cable to board connections, including computer peripherals, industrial control panels, medical imaging equipment, telecommunications gear, data storage systems, security cameras, and automotive infotainment modules – markets where Antenk already serves customers including Flextronics, Foxconn, and Fortune 500 companies across the USA, Germany, South Korea, India, Russia, and beyond. Usage method: prepare 1.27mm pitch flat ribbon cable with 20 conductors. Place the cable into the IDC contact slot, align the cable with the polarizing key, and press using a manual or pneumatic press tool until the contacts pierce the insulation and make reliable connection to the conductors. Assemble the straight exit hood over the terminated cable and snap it onto the connector body. The split hood design allows easy installation even with pre terminated cables. Finally, solder the connector to the PCB through hole or SMT tails. Precautions: ensure correct cable orientation; do not exceed 1A per contact; avoid repeated insertion and removal beyond 50 cycles; operate within -40 to +105 degrees Celsius. Advantages over competitors: unlike competitors who use single point IDC contacts prone to intermittent connection, Antenks dual prong IDC design provides redundant contact points per conductor. Competitors often use cheaper tin plating that oxidizes; Antenk uses selective gold plating on contact areas for long term reliability. While others require 20000 plus MOQ for custom hood tooling, Antenk offers low MOQs of 1000 units with no tooling fees for standard 20P configurations. Our IATF16949 certification ensures automotive grade quality, and our in house 40 plus lab test devices including XRF, environmental chambers, and insulation resistance testers guarantee every batch meets EIA 364 standards.

Antenks vertical integration delivers consistent quality for the 1.27mm series 20P hooded IDC connector. Process flow: first, in house mold design using our 380 plus plastic injection molds for the connector housing, hood, and contact carrier. Second, injection molding on 10 Japanese Taiwanese 35 to 120 ton machines using glass filled PBT or nylon 6/6 with melt temperature 270 degrees Celsius and mold temperature 85 degrees Celsius. Third, high speed stamping of IDC contacts on 9 Japanese Taiwanese presses using 0.20mm phosphor bronze strip with precise fork geometry for insulation displacement. Fourth, selective barrel plating: nickel underplate of 2 microns plus gold of 0.4 microns on contact tips. Fifth, automated assembly: insertion of contacts into housing using high speed assembly machines, followed by hood assembly. Sixth, 100 percent electrical continuity and contact position inspection using automated vision systems. Seventh, contact resistance testing per EIA 364 06 below 20 milliohms. Eighth, insulation resistance testing per EIA 364 21 at 500V DC. Ninth, dielectric withstanding voltage testing per EIA 364 20 at 500V AC. Tenth, 48 hour salt spray corrosion testing on sample basis. Finally, final QC with lot traceability and dimensional report. Our laboratory houses more than 40 testing devices including XRF, profile projectors, environmental chambers, and insulation testers. With over 300 employees, more than 18 mold making machines, and over 180 automatic assembly machines, we provide free samples, complete 2D and 3D CAD drawings, and 24 hour technical support. Contact Antenk today for a quotation – we respond within 4 hours and ship 1.27mm 20P hood IDC connector samples within 3 days. Ask about volume discounts starting at 5000 units and custom options such as different plating, hood color, or polarized key orientation. With 70 percent of our products exported to over 60 countries and 18 years of innovation, Antenk is your trusted partner for high reliability IDC connector solutions.

FAQ

Q: Are you trading company or manufacturer?

A: We are professional manufacturer specialized in connector and cables. And we export e our products with our clients directly.

Q: Can you do OEM and ODM?

A: Yes, OEM and ODM are both acceptable. The material, color, style can customize, the basic quantity we will advise after we discuss.

we can support ODM and OEM service here, we have strong R&D team in Atkconn group.

Q: How many different types of products your company manufactures?

A: Now we have more than 10,000 products. We have a strong advantage of OEM, just give us the actual products or your idea that you want, we will manufacture for you.

Q: What’s your MOQ?

A: If we have the products in stock, it will be no MOQ. If we need to produce, we can discuss the MOQ according to customer’s exact situation.