Automatic Staggered Fin Evaporator Folding Machine

4 month ago

12 0 

2 year

Product details

Electric Press CNC Bending Fin Evaporator Machine Plate Folding Machine

Product Composition and Structure

As a mature piece of Staggered Fin Evaporator Assembly Machine, the equipment is composed of workbench, tension device, folding device, length adjustment device and electric control device. The whole set of action is driven by oil cylinder, while the electric appliance is controlled by relay.

I. The workbench is the square tube and welded-steel plate construction, and equipped with two pneumatic jointers and the air valve group.

II. Tension device is composed of tension cylinder and dead plate, guide components and tension dropheads.

III. The folding device is composed of folding cylinder and mounting plate, two racks for reverse heads and diagonal making head components. The diagonal making cylinder drives the diagonal making axles in diagonal making head components to rotate through gear rack, and the pipes in the axles can be made diagonal when the diagonal making axles in the two sliding plates rotate towards reverse directions.

IV. The size adjustment device is composed of lead screw, feeding box/ sliding box and their base, bearing pedestal, locknut and hand wheel. The bearing pedestal is integrated with the roof of guide component, tension cylinder is installed in feeding box/ sliding box base, and shake the hand wheel and rotate the lead screw to adjust the distance between tension dropheads and folding diagonal making heads.

V. The low-voltage apparatus of electric control gear adopts the Schneider brand.

Equipment Operating Instructions

Developed as Automatic type, the unit realizes streamlined forming workflow as follows: Firstly, adjust the distance between tension dropheads and folding diagonal making heads through lead screw according to the product length, to make it conform to the size requirements of product. Put the single chips after diagonal making into 3 R module, tread the foot pedal, tension cylinder to drive the tension dropheads move a certain distance upward, and make the pipes tension; next, the folding cylinder promotes the folding diagonal making axles to rotate through gear rack, and rotate the two round heads at the end of single chips by 60° and 120° in the multiple of 1:2 in reverse directions; after the reverse is in place, the tension cylinder is restored to loosen the pipes; then the folding cylinder is restored. At this time, take out the workpieces by hand.

Equipment Maintenance

Classified as professional Evaporator Forming Machinery, this device requires standardized operation management: Operators can only operate the equipment after they get familiar with the equipment structure, performance and its essential points of operation.

Feature	The compressed air is generally adjusted to be 0.5-0.8Mpa.
	It needs to add the lubricating oil once per shift between the friction surfaces of rack and guide box; it also needs to add the lubricating oil once per shift between the friction surfaces of linear bearing and guide rod of tension dropheads.

Electric Press CNC Bending Fin Evaporator Machine Plate Folding Machine

Similar Video Recommendation

< >

128

Four Heads Spot Welding Machine

125

Metal Wire Pneumatic AC Spot welding machine

122

Cross Spanner Butt Welding Machine

113

automatic loading brake shoe roll welding machine

110

double head Spot welding machine with Automatic nut feeder (1)

102

Air Cooled Water Chiller

102

Copper braided wire welding and cutting machine

102

xy axis automatic spot welder

Bossgoovideo.com Contact Now

If you are interested in the product, contact Bossgoovideo.com for more information

*To:: Ningbo Xin Chang Machinery Co.,Ltd

*Message:

Submit

 Disclaimer :

The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.

Suppliers

Ningbo Xin Chang Machinery Co.,Ltd

Audited supplier

2 year

Main Product: Friction Welding Machine, Spot Welding Machine, Butt Welding Machine, Seam Welding Machine, Laser Welding Machine, Stud Welding Machine

Contact now