Home organization
-- Kitchen: hang towels, rags, spatulas, cutting boards, etc.
-- Bathroom: Hang cleaning tools, towels, and shower curtain rods.Entrance/bedroom: hang light items such as keys, hats, scarves, etc.
Car storage
-- Installed on the backrest of the front or rear seats of a car, hanging mobile phones, masks, water bottles, small bags, children's toys, etc.
Business and Office
-- Retail store: Display of goods on supermarket and convenience store shelves.
-- Office: Hang sticky notes and organize wires.
-- Gym: Fixed towels and clothing.
construction steps
1. Base treatment (key steps)
-- Thoroughly clean the adhesive area with alcohol wipes
-- Ensure that the surface is completely free of oil, water, and dust
-- Wait for 1-2 minutes for the solvent to completely evaporate
2. Paste operation
-- Remove the protective film from the adhesive surface to avoid finger contact with the adhesive layer
-- Align the position and stick it tightly at once to avoid repeated tearing and pulling
-- Press with uniform pressure for more than 30 seconds
-- Exclude bubbles from the center to the edges
3. Curing waiting
-- No weight bearing within 24 hours after pasting
-- Extended to 48 hours when the temperature is below 15 ℃
-- Avoid touching or moving during this period
mportant precautions
The main reason for paste failure is:
-- Loose walls (latex paint, etc.) result in insufficient bonding strength
-- The surface cleaning is not thorough, and there is an oil film that is not visible to the naked eye
-- Suspend heavy objects in advance before reaching the curing time
-- The environmental humidity is too high or the temperature is too low
Demolition method:
-- Heat the adhesive surface at low temperature with a hair dryer for 1-2 minutes
-- Slowly pull the fishing line horizontally away from the wall
-- Remove residual adhesive stains with alcohol or specialized adhesive remover
-- Prevent wall damage caused by hard prying