Fiber fabric rubber-plastic composite ducts were a
3 week ago
1. The air flow at the inlet of the bag duct should be as smooth as possible, if there are difficulties, plenum or rectifier grid should be set up to eliminate the rotating and enrolling air flow;
2. The inlet wind speed of the bag air duct should be 6~8m/s, too high speed will make the inlet to form a negative pressure area, will not ensure the full state of the air duct.
3. The static pressure in the fabric air duct should be greater than 2.5 times the dynamic pressure, the longer the air duct, the greater the proportion of static and dynamic pressure.
4. The normal static pressure in the cloth duct is 80~150Pa, and too high pressure can easily cause the rupture of the duct when the fan starts
5. The design of the pipeline should be as straight as possible to prevent unnecessary bends and branches of the pipe, in order to reduce the resistance of the pipeline part.
Saux bag air pipe technicians are service engineers who have been trained by the technical center and obtained the corresponding qualification certification, equipped with all imported and professional precision test instruments, adjust the patented parts of the air volume control valve, air pressure control valve, and debug the system until the design effect is achieved.
Professional installation can ensure the performance of the system, life and the beauty of the entire system, which is the necessary guarantee for the final system quality. Professional debugging can make up for the problems caused by changes in the original design and the actual situation on the site.
Similar Video Recommendation
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Jiangsu Buna Technology Development Co. , Ltd.
- *Message:
-
Submit
Main Product:
Wind Tube Fabric,
Fiber Cloth Air Duct,
Flame Retardant Cloth Air Duct,
Air Duct,
Bag Air Duct ,
Fabric Air Duct