bright-finish tinplate coil

The surface treatment method is bright surface, without coloring. In the bright state, the coiled material is reflective and transparent, with obvious mirror feeling, no stone grain, matte or mottled marks, and high surface purity. This kind of surface effect is especially suitable for finished products with clear requirements on appearance.This glossy tinplate coil we supply belongs to the first-class product, and the raw material is MR grade substrate. This material is characterized by cleanliness and few impurities. When it comes to the processing of precision parts that have strict requirements on deep drawing or tensile properties, it has the advantage of low rejection rate during continuous operation, and there are few bad cases such as tensile cracking and ridging. The thickness of the whole roll is only 0.15mm, and it takes an extremely thin route, but it is not delicate. T3, the hardness setting, is just stepping on a balance point: it not only ensures that the finished product will not go out of shape, but also ensures that the stand-up place can stand, and it will not be so hard that the next process cannot be put into use, leaving enough room for deformation for secondary processing such as bending and curling. Tin plating, both sides of which are 2.8 grams per square meter, is evenly plated and solid, and there is no phenomenon of one piece being thick and one piece being thin. Therefore, its antirust ability and weldability are good, and its appearance comes with a uniform silvery white luster, which makes it look quite bright. As for how to pack, we follow the actual needs of customers here. Generally, the default is the inner wrapping film, the outer moistureproof paper, and the protective skin with protective corners, which can be matched as needed. Whether the pallet is fumigated wood or multi-layer board depends on your transportation and storage conditions. In a word, how do you want to come on the packaging, we will cooperate to do it.