Keystone Jack PC Board

The USB 3.0 specification defined a new architecture and protocol, named SuperSpeed, which included a new lane for a new signal coding scheme (8b/10b symbols, 5 Gbps; also known later as Gen 1) providing full-duplex data transfers that physically required five additional wires and pins, while preserving the USB 2.0 architecture and protocols and therefore keeping the original four pins and wires for the USB 2.0 backward-compatibility, resulting in nine wires in total and nine or ten pins at connector interfaces (ID-pin is not wired).

• Electrical:
• Voltage rating: 30Vrms
• Current rating: 1.8A
• Mating cycles: >1500 insertions
• Contact resistance: 30mΩ max. for VBUS and GND contacts, 50mΩ max. for all other contacts
• Insulation resistance: 1000MΩ (min) 
• Dielectric strength: 100V AC
• Specifications:  
• UTP 3.0 hub USB connector
• Plug-in type
• Fluke, RoHS compliant
• Small sample orders are accepted
• Storage temperature: -40 to +85°C
• Operating temperature: -25 to 85°C 
• Mechanical:
• Housing material: PC UL94V-0
• Inner material: flame-retardant ABS UL94V-0
• PCB material: FR-4
• Wire: 26AWG solid wire.