GP40-SP20 Twin Pump Hydraulic gear pump
Full English Product Content
GP40‑SP20 Twin Pump Hydraulic gear pump is a popular tandem combined Hydraulic gear pump assembled by heavy‑duty cast iron GP40 main stage and lightweight aluminum SP20 auxiliary stage. As a dual‑output hydraulic pump, it provides separated oil supply and serves as core power component of hydraulic system for construction and agricultural Machine.
Main Features
1. This twin Hydraulic gear pump adopts one shared drive shaft integrated structure. GP40 main body is made of high strength cast iron with carburized quenched alloy steel gear pairs and heavy‑load DU bearings for high pressure working; SP20 auxiliary section uses aluminum housing to reduce total weight, perfect for pilot, steering or cooling circuit of the whole hydraulic system.
2. Each pump stage is fitted with copper pressure‑balanced wear plate for automatic axial clearance compensation, maintaining high volumetric efficiency under long continuous operation. Low pressure pulsation and low noise level greatly improve stability of the Machine.
3. Independent displacement selection: GP40 section can choose displacement from 8~92 cc/rev, SP20 commonly available in 06,10,16,20,25 cc/rev. Flexible flow combination satisfies different actuator requirements inside one hydraulic system.
4. Rated working pressure: GP40 stage 230 bar, SP20 stage 200 bar; peak pressure can reach 280–290 bar. Max input speed is up to 3000 rpm, min speed 500 rpm. Clockwise or counter‑clockwise rotation can be customized.
5. Multiple shaft ends, mounting flanges and oil port directions are optional. NBR and Viton seal materials are available for different oil temperature and media. Every hydraulic pump will pass strict full‑performance testing before shipment, 12‑month warranty supported.
Typical Technical Parameters (Reference)
- Type: Tandem Twin Hydraulic Gear Pump
- GP40 Main Stage Displacement: 8 ~ 92 cc/rev (customizable)
- SP20 Auxiliary Stage Displacement: 6,10,16,20,25 cc/rev
- Rated Pressure: GP40:230 bar|SP20:200 bar
- Max Intermittent Pressure: 290 bar
- Max Speed: 3000 rpm
- Min Speed: 500 rpm
- Housing: GP40 Cast Iron, SP20 Aluminum Alloy
- Rotation: CW / CCW customizable
Applications
This GP40‑SP20 Hydraulic gear pump is widely used for loader, backhoe loader, road roller, tractor and other heavy‑duty Machine. The main pump supplies large flow for lifting or travelling circuit, while the small SP20 pump provides auxiliary power, greatly simplifying pipeline layout of complete hydraulic system.