Straight Through Hole Wafer Connector(1)
2 week agoThis Straight Through Hole Wafer Connector is robust power Connector produced by antenk. It serves High current power controllers, Pcb receptacle household devices and Wtb header industrial drivers for reliable wire‑to‑board power and signal interconnection.
Three verifiable advantages differentiate this unit from ordinary interconnect components.
- Nylon66 housing complies with UL94V‑0 flame retardant requirement for general wave soldering process.
- Tin‑plated brass pins support stable 7A high current transmission per circuit.
- Wide pole selection from 2‑16 positions to satisfy diverse wire‑to‑board connection requirements.
Standard bulk‑order MOQ is 1000 pieces. Antenk provides engineering samples for PCB validation. It can replace common 3.96mm through hole wafer connector. OEM for pole count is available.
Request a free sample →

Specification Table
| Item | Specification |
| Product Name | Straight Through Hole Wafer Connector |
| Pitch | 3.96mm |
| Pin Material | Brass |
| Rated Current | 7A per circuit |
| Rated Voltage | 250V AC/DC |
| Housing Material | Nylon66 UL94V‑0 |
| Pole Range | 2‑16 Poles |
| Operating Temperature | -25℃ ~ +85℃ |
1 Product Overview
Straight through hole wire‑to‑board wafer Connector manufactured by antenk. It adopts vertical 180 degree through‑hole design with tin‑plated brass pins, meets RoHS and HSF standards for power connection projects.
2 Core Advantages
- Nylon66 UL94V‑0 plastic housing provides good flame retardant performance
- 7A high current capacity fits power supply connection for household and industrial equipment
- Complete pole specifications 2‑16P, flexible for different wiring schemes
3 Application Scenarios
- Power controller internal wire‑board connection
- Household appliances power signal wiring
- Industrial driver module interconnection
- General electronic equipment wire to board linking
4 OEM Service
- Custom pole number within 2‑16 positions
- Support customized packing for mass‑production orders
- Special requirement consultation for large volume projects
5 FAQ
Q: What pole options can I get for this wafer connector
A: It supports 2 to 16 poles for selection.
Q: What is the maximum rated current
A: Rated current reaches 7 amp for each single circuit.
Q: Can engineering samples be offered
A: Samples are available for PCB layout and performance testing.
Similar Video Recommendation
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- HuiZhou Antenk Electronics Co., LTD
- *Message:
-
Submit
Main Product:
Connectors ,
Wire harness,
Board to board connector ,
Wire to board connector ,
Battery holders ,
Industrial connector