membrane chamber filter press

The filter press consists of a frame filter plate and a filter cloth, and the frame acts as a clamping device for the filter plate. The space between the filter plate and the filter plate forms a filter chamber, which is used to store the filter cake. The filter cloth is attached to both sides of the filter plate to filter the water in the sludge. The whole working process is that the filtered material enters the filter press through the special pump of the filter press. Under the pressure, the solid part is extruded and piled up in the filter chamber, while the water part leaks through the filter cloth, and this process continues to circulate. until the filter chamber is completely filled with filter cake. When the filter press finishes working, we don't need to cut off the power, and the diaphragm filter press will perform a second pressurized filtration, which can make the water content of the filter cake lower. When the secondary pressing is over, the filter press can unload the cake.

Types of Filter Press according to:
> Closing mode:  manual, gear drive, hydraulic;
> Filtrate flow:   open flow, close flow, cake washing, non-cake washing, center feeding, corner feeding,etc..
> Filter plate structure:  recessed plate, plate &frame, diaphragm squeeze (membrane) plate;
> Filter plate material:  PP, rubber, cast iron, stainless steel;
> Filter Plate size:  320, 450, 630, 800,1000, 1250, 1500, 2000