VgEYwR3GH04DqMfN7h2_234810143257_sd_hq

The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that is not easy to rust. Stainless steel plates refer to steel plates that are resistant to corrosion by weak media such as air, steam, and water, while acid-resistant steel plates are steel plates that are resistant to corrosion by chemically aggressive media such as acids, alkalis, and alkalis. Salt.

Corrosion resistance
Stainless steel has a similar ability to resist general corrosion as the unstable nickel-chromium alloy 304. Primarily used in high temperature applications which require the material to have strong resistance to sensitization to prevent intergranular corrosion at lower temperatures.
high temperature oxidation resistance
All stainless steel plates have high temperature oxidation resistance, but the oxidation rate will be affected by inherent factors such as exposure environment and product shape.
physical properties
The overall heat transfer coefficient of a metal depends on other factors besides the thermal conductivity of the metal. In most cases, the heat dissipation coefficient of the film, the scale and the surface condition of the metal. Stainless steel keeps the surface clean, so it transfers heat better than other metals with higher thermal conductivity. Liaocheng Suntory Stainless Steel provides 8. Technical standards for stainless steel plates High-strength stainless steel plates with excellent corrosion resistance, bending performance, toughness of welded parts, and stamping performance of welded parts and their manufacturing methods. Specifically, C: 0.02% or less, N: 0.02% or less, Cr: 11% or more and less than 17%, appropriate content of Si, Mn, P, S, Al, Ni, and satisfy 12≤Cr Mo 1.5Si≤ 17. The stainless steel plate with 1≤Ni 30(C N) 0.5(Mn Cu)≤4, Cr 0.5(Ni Cu) 3.3Mo≥16.0, 0.006≤C N≤0.030 is heated to 850～1250°C, and then carried out at 1°C/s Heat treatment for cooling above the cooling rate. In this way, it can become a high-strength stainless steel plate with a structure containing more than 12% martensite by volume, high strength above 730MPa, corrosion resistance and bending performance, and excellent toughness in the welding heat-affected zone. Reusing Mo, B, etc. can significantly improve the stamping performance of the welded part.