matte metallic black film

Pearl Metallic Vinyl Wrap Satin/Matte Surface Vehicle Wrap Film

About this Pearl metal black vehicle vinyl warp

• Flexible and Stretchable for concave area.
• Low cost to change the look of your vehicles.
• Easy installation with dry application method.
• Heat gun or household blow dryer for shaping is required
• Low tack glue self adhesive .
• Material has no warranty for fading.
• 5ftx60ft/roll, package around 13kg/roll.

1. Prepare tools and materials: cleaning agents, towels, films, scraper blades, water sprayers, etc.
2. Clean the surface of the car: Use cleaning agents and towels to clean the surface of the car, ensuring that it is clean and dust-free.
3. Measurement and cutting of film: Use measuring tools to measure the areas that require film application, and then use a cutting tool to cut the film into appropriate sizes.
4. Wet film: Spray water on the film and car surface to allow the film to move and adjust its position.
5. Film application: Carefully apply the film to the surface of the car, ensuring that the film is flat and free of bubbles.
6. Scraping exhaust: Use a scraper to squeeze out the water and bubbles on the surface of the film, ensuring that the film is tightly attached to the surface of the car.
7. Edge trimming: Use a cutting tool to trim the edge of the film to make it fully adhere to the surface of the car.
8. Cleaning and polishing: Clean the surface of the film and use a polishing agent to polish the surface of the film to make it smoother and more aesthetically pleasing.
9. Completion: Wait for the film to dry, then check if the surface of the film is completely adhered, ensuring that there are no bubbles or loose parts.