CNC Machining 00_00_30-00_00_45
3 year agoFetures
◊ Universal input 85 ~265VAC
◊ Output 12/24VDC 0~2A, 24Watts
◊ EI-57 standard package
◊ High efficiency, less power dissipation meet EISA 2007 requirement
◊ Over current ,short circuit & over voltage protection
◊ Design compliant with UL, cUL, GS, CE standard
Description
The AD24-12 & AD24-24 module are a series of isolated, Fly-back digital power supply that operate from a input range 85 to 265VAC (47~63Hz). These digital power supplies are available in a range of output voltage 12V and 24V, continuous 24Watts output capability. They are packaged in an EI-57 standard UL 94V-0 plastic enclosure; plug is 3 prong US type. Standard features include over current and short circuit protection. The efficiency is 80% minimum under 25% to 100% load condition. Typical applications include IT peripheral, home security data access system and other computing and communications equipment.
Applications
◊ Home security data access system
◊ Distributed power architectures
◊ Data networking equipment
◊ Telecommunication
◊ Computers and peripherals
Part Number Selection
Output Voltage | Input Range |
Max. O/P Current |
Typical Efficiency | Model |
12V | 85-265VAC | 2.0A | 84% | AD24-12 |
24V | 85-265VAC | 1.0A | 84% | AD24-24 |
Absolute Maximum Ratings*1
Parameter | Symbol | Min. | Max. | Unit |
Continuous Input Voltage | Vin | 85 | 265 | V |
Operating Temperature | Ta | -20 | 50 | °C |
Storage Temperature | Ts | -40 | 85 | °C |
Operating Humidity*2 | 20% | 80% | RH | |
Storage Humidity | 10% | 90% | RH |
Note:
*1. Use beyond the maximum rating may cause a reliability degradation of the power supply or may permanently damage the unit.
*2. Above humidity range to be defined under Non-condensing status
Input Specifications
Parameter | Symbol | Min. | Typ. | Max. | Unit |
Input Voltage | Vin | 85 | 120/230 | 265 | VAC |
Frequency | f | 47 | 50/60 | 63 | Hz |
No Load Input Power | Pi(N.L.) | 0.5 | Watts | ||
Inrush Current*3 | 30/60 | A | |||
Input Current | 1.0 | A |
Note:
*3. The inrush current is measured under normal input voltage (115/230VAC), cold start, 25oC & full load condition
Output Specifications
Parameter | Model | Symbol | Min. | Typ. | Max. | Unit |
Output Voltage Set Point |
PIP12VDCe PIP24VDCe |
Vout |
11.94 23/88 |
12 24 |
12.18 24.36 |
V |
Load Regulation*5 | All | % | 1% | |||
Line Regulation*6 | All | % | 1% | |||
Regulation Over Temperature(-20°C to 65°C) | All | TBD | mV | |||
Output Ripple & Noise | All | 150 | mVp-p | |||
Output Current Range |
PIP12VDCe PIP24VDCe |
Iout | 0 |
2.0 1.0 |
A | |
Turn On Time | All | TBD | ms | |||
Overshoot at Turn On | All | 5 | % |
Note:
*4 All specifications are defined under nominal input (120/230VAC), full load at 25 oC unless otherwise specified.
*5 Load regulation: by change the output load from 10% to 100% of rated load carries out the measurement.
*6 Line regulation: by change the line input from specified range, carries out the output measurement. With fixed rated load.
*7 The ripple & noise is measured using 0-20MHz band width oscilloscope & terminated output a 10u/35V tantalum or MLCC X5R capacitor.
Parameter | Model | Symbol | Min. | Typ. | Max. | Unit |
Transient Response*8 | ||||||
ΔV 50% to 100% of Load | All | TBD | mV | |||
Recovering Time | Tr | TBD | μS | |||
ΔV 100% to 50% of Load | TBD | mV | ||||
Recovering Time | Tr | TBD | μS |
*8 di/dt = 0.5A/uS, Ta = 25 oC. with 10u/35V tantalum or MLCC X5R capacitor on output.
General Specifications
Parameter | Model | Symbol | Min. | Typ. | Max. | Unit |
Efficiency*9 | All | η | 85 | % | ||
Switching Frequency | fosc | 65 | KHz | |||
Over Voltage Protection | OVP | 110 | 130 | 150 | % | |
Over Current Protection | OCP | 110 | 145 | 180 | % | |
Short Circuit Protection*10 | SCP | Automatic Recovery | ||||
Mean Time Between Failure*11 | MTBF | 50,000 | Hrs | |||
Indicator | Red LED Shows Output is Powered |
*9. The efficiency η is average efficiency value where η=(η1+η2+η3+η4)/4, η1~η4 means the efficiency value under 25%,50%,75% & 100% load & normal input condition.
*10. When short circuit or over current is activated, the power supply will go into Hiccup mode against short circuit or overload conditions and will recover once fault condition removed.
*11. T ambient at 25oC, rated load condition
Mechanical Specifications
◊ EI-57 standard package
◊ Mounting, plug into outlet and is secured with electrical plate mounting screw
◊ Plug 3 prong US
◊ Connection, 3 screw terminals (Positive, Negative, Earth ground)
◊ Weight : 180g typical
MPI have two division, electronics design & assembly house and metal stamping & CNC chop.
In Electronics shop we provide our professional skills on power electronics design and manufacture. From A to Z, we can help you
translate your idea into real products.
Our Metal shop provide professional stamping service which include creating mold, Sheet Metal Fabrication,stamping,Metal Roofing Tile
and surface treatment. The implementation of CNC machine provide high precision machining parts and machining service to our
customer.
Over 20 years experience on doing business with US and EU customers. We can understand what you need and what you concern.
We are able to reply to customer within 24 hours, which can let you speed up your decision and solve your problem immediately.
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Master Prosperous Industrial Co.Ltd.
- *Message:
-
Submit
Main Product: OEM Sheet Metal Stamping Service, OEM CNC Machining Service, ODM Power Electronics Design and Assembly, ODM LED Driver, ODM Security AC/DC Power Supply, ODM Access Control Power Supply