motor housing

The motor cover (also known as the hood) is the most striking body component, and is one of the parts that car buyers often look at. The main requirements for the engine cover are heat insulation and sound insulation, light weight and strong rigidity. It can be manufactured by CNC engraving, sand casting, transparent acrylic(PMMA/PC) 3D Printing.

Removal of engine cover
Open the engine cover and cover the car with a soft cloth to prevent damage to the finish paint; Remove windshield washer nozzle and hose from engine cover; Mark the hinge position on the hood for easy installation later; Remove the fastening bolts of the engine cover and hinges, and prevent the engine cover from slipping off after the bolts are removed.
Installation and adjustment of engine cover
The engine cover shall be installed in the reverse order of removal. Before the fixing bolts of the engine cover and hinge are tightened, the engine cover can be adjusted from front to back, or the hinge gasket and buffer rubber can be adjusted up and down to make the gap match evenly.
Adjustment of engine cover lock control mechanism
Before adjusting the engine cover lock, the engine cover must be corrected properly, then loosen the fixing bolt, move the lock head back and forth, left and right, so that it is aligned with the lock seat, the front of the engine cover can also be adjusted by the height of the dovetail bolt of the lock head.