Electric projector hanger

Many customers believe that the projector should be installed at the center height of the projection screen, which is actually a misconception. The projector has an off-axis function. Motorized Projector Mount is generally installed at the center position on the projector screen, which is more aesthetically pleasing and suitable. Therefore, the downward height of the hanger can be selected by adjusting the electronic limit.

Attention: Projector width less than 315, depth less than 300, height less than 180

Product parameters：

Load capacity: 15 kilograms

Minimum ceiling depth: 70mm+projector thickness

Ceiling cover plate size 410 * 410mm

Suggested slotting size: 380 * 380

Product size:

Hanger box left and right width: 475

Box front and rear depth: 330

The internal height of the box is 160

Product Highlights:

Low noise, with a people-oriented internal design mode, and no more than 50 decibels of noise during maneuvering.

Accurate positioning,The mechanical positioning shear type and deceleration electromagnetic brake design achieve the advantages of smooth operation and accurate positioning of the product, and the positioning error is controlled within 2 millimeters, which is aesthetically pleasing.

Strong load-bearing capacity,Not only does it have accurate positioning, but it also outperforms similar products in terms of load capacity, with a high safety factor. There are also different specifications of load options available.