98ab69386b7da83fe9e71fac4e5a1c39_raw
5 month ago
For air sampling where 25mm diameter pipes are required, pipe clamps are a common tool for securing and connecting pipes. Choosing the right pipe clamps can ensure the sealing and stability of the pipe joints, avoiding gas leakage or pipe detachment.
When installing pipe clamps, please pay attention to the following points:
1. Make sure the surface of the pipe is clean and dust-free to ensure that the pipe clamp can be firmly fixed on the pipe.
2. Slip the pipe clamp onto the pipe and adjust it to the proper position.
3. Tighten the screws with an appropriate tool (e.g., wrench) until the pipe clamps hold the pipe securely. Be careful not to over-tighten as this may damage the pipe or the pipe clamp.
4. Check that the connection parts are tight to ensure that there is no gas leakage.
For 25mm diameter pipes, you need to choose the appropriate size of pipe clamps to ensure the tightening effect. Pipe clamps are usually made of metal (e.g. stainless steel, carbon steel) or plastic, and the exact choice of material depends on the needs of the environment where they are used, such as whether they need to be corrosion-resistant, heat-resistant and other characteristics.
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Yimei (Hebei) Fire Equipment Co., Ltd
- *Message:
-
Submit
Main Product:
Pipe Clamp,
Air Sampling Pipe,
Capillary Sampling,
90 Degree Pipe Elbow,
Three-way Connection,
45 Degree Elbows