Ebara Brand

Absorption Chiller is an equipment which uses heat source from natural gas ,diesel, solar energy and waste heat to produce a cooling system.  As its practical function, absorption chiller is normally installed in air-conditioning building such as factory, office, hospital or airport. Especially, the machine utilize the waste heat recovery from gas engine or gas turbine.

In the Generator, the water will be changed to vapor and leave the lithium bromide solution, but it will not be left as a waste. It will be formed as a liquid and drop to bottom of the generator. The liquid flows down to preheat the weak solution in the heat exchanger and becomes strong solution. Then, it flows back to spray over the absorber to absorb the vapor for next process again.

Meanwhile, the vapor which left from lithium bromide solution in generator flows into the condenser. The solution will be cooldown by the cooling water, then it will be condensate to the refrigerant. It flows down to the evaporator due to the vacuum condition which made the water boiling temperature becomes low.

In the Evaporator, 12°C chilled water which returns from operation system flows into the evaporator. The unwanted thermal energy will be extracted by spraying refrigerant over the chilled water pipe in the evaporator. Therefore, the chilled water temperature will be decreased to 7°C.