6.28 plastic tape

With the development of science and technology, ultrasonic technology has gradually developed from the medical field to the industrial field, and it is widely used in people's daily lives.
Welding steps of Ultrasonic Welding Machine:
In the first step, the two plastic strips that need to be welded are placed into the card slot in the welding bottom mold, and then the pressing device on the tooling is adjusted separately to fix the plastic belt on the lower avil.
Step 2: place the plastic fittings in the card slot where the two plastic strips need to be connected
Step 3: Press the start button to weld
Step 4: Press the stop button, complete the welding, take out the welded plastic tape, test its firmness.
Plastic Ultrasonic Welding Machine is to use the principle of vibration friction to transmit ultrasonic energy to the welding area through the welding parts, so that the interface of welding produces a large sound resistance and produces local high temperature. Taking advantage of the poor thermal conductivity of the plastic and the heat gathering in the welding area, the welding surface of the plastic melts rapidly, and the welding head of the ultrasonic welding machine plus a certain pressure makes the two welding surfaces fused into one. When the 20K Ultrasonic Plastic Welder acts, the pressure continues, resulting in a packing time, so that the welded plastic solidifies and forms, and finally reaches the plastic workpiece with high welding strength.
The ultrasonic plastic welding machine produced by Dezhong has an independent digital frequency tracking system, which is automatically detected and automatically troubleshooting at startup, and is easy to use.
The machine can reach an operating frequency of 400HZ and is suitable for a variety of solder joints. The frame of the plastic welding machine adopts square column design, which is uniform when welding products, easy to form products, and low scrap rate.

https://www.ultrasonicweldermfg.com/Ultrasonic_Quilting_Machine.html