spray disinfection robot
3 year agoWhen the COVID-19 pandemic broke out in worldwide in early 2020, Eastar saw massive interest from companies looking to sanitize and sterilize their places of business. With it's successful & professional experience in autonomous robot for many years, Eastar developed UV-C Robot 1.0 in March, 2020. Along with the recognition of user's from airport & station in domestic market, Eastar developed the second generation Eastar ultraviolet disinfection robot in September, added the human body temperature measurement, the portrait identification, the security alarm and so on function, makes it become the public health epidemic prevention product.
For daily use, traditional disinfection solution such as disinfectant, alcohol, smoke and so on, caused excessive labor costs, damage to the body of cleaning person, too long time, too high cost, easy to form secondary pollution, bacteria easy to produce drug resistance and so on. Eastar UV-C Robot, can complete the disinfection job of 1000 square meters in about 100 minutes, which is more efficient and effective than the previous manual disinfection by labor.
Eastar UV-C Robot, using high intensity 253.7nm ultraviolet to destroy the DNA、RNA of bacteria and kill it. Testing in high level disinfection mode, the spores of environmental surface (smooth surface, rough porous surface) and various multidrug resistant bacteria can be completely killed by 99.99%.
Features:
Spray disinfection: Disperse the atomized droplets to the disinfection area by high-speed airflow
Precise killing: 360 degrees, spray volume: 2200ml/H, Sterilization rate> 99.9%.
Large capacity: 25L disinfection liquid tank, Disinfection covers an area of 35000 m2.
Environmental recognition: 3D vision detection of three-dimensional obstacles in the environment, safe and no blind spots.
Smart work: Autonomous navigation, full coverage of the disinfection area, automatic recharging at low power
Parameters:
Parameters of Spray Disinfection Robot | ||
Complete Machine | Equipment Name | Fresh Air Disinfection Robot |
Model | TPPW-08 | |
Casing size(mm) | 560*560*1472 | |
Packing Size(mm) | 660*660*1090 | |
Gross Weight | 66KGS | |
Rated voltage | DC25.6V | |
Total Power | 200W | |
Casing materials | ABS | |
Disinfection Module Parameters for Fresh Air Disinfection Robot | ||
Disinfection Module | Rated Voltage | 24V |
Primary filter purification | Yes | |
Water tank capacity | 25L | |
Max Spray Volume | 2200ML/H | |
Anion purification Yes | Yes | |
Disinfection Efficiency | About 400m2/min | |
Maximum Operating Noise | ≤60DB | |
Spray the diameter | 4m | |
The Mist particle size | 8μm | |
Static disinfection area | 20-50m² | |
AGV Chassis Specification | ||
Power Supply | Battery | LFP battery |
Battery Capacity | 25.6V/40Ah | |
Charging time | 3-4 H (Charging station) | |
Battery Life | 80% after 3000 charging cycle | |
Max Charging Voltage | 29.4V | |
Endurance(no load) | 5-6 H | |
Driving Wheel | Dimensions (D*W, mm) | 160*45 |
Material | SBR | |
Quantities | 2 pcs | |
Assistance wheels | 4 pcs | |
Power | 50W | |
Max Speed | 180r/min | |
Max Torque | 4.7NM | |
Camera | Vision Camera | 1 pc |
Resolution | 10 million pixel | |
Performance | Max Load | ≈50KG |
Max Speed | ≈1.5m/s | |
Navigation Accuracy | ±30mm | |
Direction | 360°Rotation | |
Safety Protection | Emergency Stop Button | Yes |
Ultrasonic device | 5 pcs | |
RGBD 3D camera | 1 pc in front | |
Voice broadcast | Yes | |
Remote Control (start/stop) | Yes | |
Navigation | Navigation Mode | SLAM Navigation |
Route planning | Auto planning / manually assigned | |
Navigation Sensor | TOF Lidar(20m) | |
Communication | Wireless network | WIFI 2.4GHz |
Configuration Port | Ethernet RJ45 | |
USB | USB3.0 | |
Environment | Ambient temperature | 0°C- 45℃ |
Environment humidity | <60% | |
Operating environment | For indoor use only (no dust/corrosive gas) | |
Protection level | IP20 | |
Floor COF Rating | ≥0.5 | |
Ground requirement | Concrete ground (no water/oil/dust) | |
Ground conditions | Vertical over-obstacle capacity | 5mm |
Gap-crossing capacity | 10mm | |
Max climbing angle | 5° | |
Charging Device | ||
Direct charger | Input | 100-240VAC~2.2A max 50/60Hz |
Output | 29.4V—5A | |
LED Indicator light | Yes | |
Cable length | 1.5 m | |
Charging station | Size(mm) | 354*170*286 |
AC input voltage | 110VAC/220VAC(Optional) | |
DC output voltage | 29.4VDC | |
DC output current | 10A | |
Output power | 300W | |
Cable length | 1.4m | |
LED Indicator Light | Yes |
Usage places:
Certification:
Similar Video Recommendation
You May Also Like
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Foshan Dinghan Electrical Technology Co., Ltd
- *Message:
-
Submit
Main Product: Mobile TV Stand, Wall Sleeves, Metal Tool Box, Air Conditioner, Air conditioner spare parts, Metal Cabinet
You May Also Like