Great quality DOA Rapid Test Kit of Morphlne MOP,MOP test1

Product Name 
(PSA) Prostate Specific Antigen Rapid Diagnostic Kit (Immunochromatography) 
Intended Use 
One Step PSA Test is a rapid, direct binding test for the detection of Prostate Specific Antigen in serum 
/plasma/whole blood. It is used as an aid in the diagnostic of prostate cancer. 
Principle 
The test utilizes antibodies including a PSA monoclonal antibody B and goat anti-rat IgG on the 
nitrocellulose membrane with colloidal gold marked PSA monoclonal antibody A as an mark tracer. 
The reagent is used to detect the PSA in serum/plasma/whole blood according to the principle of 
double antibody sandwich method and gold immunochromatography assay 
Main components 
PSA monoclonal antibody A, PSA monoclonal antibody B, goat anti-rat IgG antibody 
Storage and Expiry 
Store as packaged in the sealed pouch at room temperature (4-30°C), avoid hot and sunshine, dry 
place, valid for 24 months. DO NOT FREEZE. Some protective measures should be taken in hot 
summer and cold winter to avoid high temperature or freeze-thaw. 
Sample Requirement 
1. serum/plasma: Collect venous blood a clean and dry container according to the standard method. 
Separate the serum or plasma for testing. EDTA, sodium citrate, sodium oxalate, heparin can be used 
as the anticoagulants. 
2. serum/plasma: After collection, separate the serum and plasma as soon as possible, in order to 
avoid hemolysis. 
3. Use fresh samples. Samples may be stored at 2-8℃ for 3 days, and should be stored at -20 ℃ if 
cannot be tested immediately. Do not freeze and thaw the sample repeatedly. 
Test Procedure 
Instructions must be read entirely before taking the test. Allow the test device controls to equilibrate 
to room temperature for 30 minutes (20℃-30℃) prior to testing. Do not open the inner packaging 
until ready, it must be used in one hour if opened (Humidity: 20%~90%, Temp: 10℃-50℃)
Result Judgment 
POSITIVE: Two distinct red lines appear. And the color of testing line is stronger than or equal to the control line. 
NEGATIVE: One red line appears in the control region(C). Or both red line appear with the color of testing line is weaker than the control line. INVALID: No red lines appear or control line fails to appear, indicating that the operator error or 
reagent failure.