Hot OEM High Thermal Conductivity Soldering Liquid Cold Plate Heat Sink with copper tube bending For IGBT 1000W cooling plate1

Copper tubes are commonly used for cooling IGBT (Insulated Gate Bipolar Transistor) modules due to their excellent thermal conductivity. When selecting a copper tube for a 1000W cooling plate, there are a few factors to consider:1. Diameter: The diameter of the copper tube will depend on the specific cooling requirements and available space. Generally, Gpu Aluminum Cooling Plate larger diameter tubes provide better heat transfer, but they may not fit in all applications. Common sizes for IGBT cooling range from 6mm to 12mm.2. Wall thickness: Thicker walls offer better durability and resistance to damage, Extruded Heat Sink Profiles but they also reduce the heat transfer efficiency. A balance needs to be struck between wall thickness and heat dissipation requirements.3. Length: The length of the copper tube will depend on the size and layout of the cooling plate. It should be long enough to provide sufficient contact with the IGBT module for effective heat transfer.4. Finning: Copper tubes can be finned to increase their surface area and enhance heat dissipation. This can be beneficial for higher power applications. The fin design will depend on the specific cooling requirements.5. Connection type: Consider the type of connection required for attaching the copper tube to the cooling plate. This could be through soldering, Gpu Aluminum Cooling Plate brazing, or using compression fittings. It is recommended to consult with a thermal engineer or supplier to determine the most suitable copper tube specifications for your specific IGBT cooling needs.