Three-star lock armor is as stable as a rock
Driving an electric tricycle through urban and rural areas, the loose front fork clamp can be called an "invisible killer": the screws are shaken off, causing the handlebars to lose control, and the performance of shock absorbers is sharply reduced. The spring shock absorber is also scrapped prematurely due to uneven force, and finally the Electric Tricycle Wheel Tire is scrapped due to partial wear. Motor Bike Triple Clamps have become a "shaky" hidden danger. Many veteran drivers admit: "When driving on a mountain road, the front fork makes a clanging sound, and I am always worried that the front of the car will suddenly fall apart!"
Our three-star column front fork clamp assembly subverts tradition with "armor-style locking + bionic bite" technology! It is made of aviation-grade 7075 aluminum alloy in one piece, and the surface is anodized. The hardness is comparable to steel but 30% lighter; the original "three-leaf lock tooth" structure firmly fixes the front fork through three bite surfaces, and with anti-loosening thread glue, the anti-seismic performance is 200% higher than that of traditional clamps. The actual test shows that the steering wheel offset is less than 1mm when pulling a 2-ton load through a 10-kilometer gravel road, and the wear rate of the Wheel Tire is reduced by 70%, making the tricycle easy to control.
Three major innovation highlights
① Three-leaf bionic lock teeth: three 45° oblique bite surfaces form a 360° wrapping without dead angles, and the bumpy road section becomes tighter and tighter;
② Aviation-grade lightweight: 7075 aluminum alloy material, light weight and high strength, reducing the energy consumption of the whole vehicle while improving the control sensitivity;
③ Intelligent anti-loosening system: built-in torque memory spring, the screw loosens 0.5 turns and triggers an early warning to ensure driving safety.
Maintenance Black Technology Guide
1. Magnetic detection method: Use a strong magnetic pen to absorb the joints of the fixture every month. If debris is absorbed, it means that there is wear and tear, which needs to be checked in time;
2. Thermal expansion and contraction maintenance: When changing seasons, use a hair dryer to heat the fixture for 30 seconds and then cool it quickly to activate the activity of the anti-loosening thread glue;
3. Nano coating reinforcement: Spray a transparent nano protective layer every six months to prevent dust, water, and oxidation, and extend the service life.