PX-2400 double pieces gluing machine folder gluer machine

PXJ-1400 SEMI AUTOMATIC FOLDER GLUER MACHINE

Machine introduction:

PXJ-2400H type high-speed gluing box machine can be used for AA piece, AB piece two-piece molding box and single-piece molding box adhesive molding. This machine can replace manual gluing in actual production and reduce labor intensity; compared with traditional semi-automatic gluing machine, it can save labor. Because of the different working mode, compared with the above two kinds of carton bonding molding process, it can also greatly improve the quality of the product.QYHX-2400H type high-speed gluing machine can be used for AA piece, AB piece of two pieces of molding box and single piece of molding box bonding molding. This machine can replace the manual gluing box in the actual production and reduce the labor intensity; compared with the traditional semi-automatic gluing box machine, it can save the labor. Because of the different working mode, compared with the above two kinds of carton bonding molding process, it can also greatly improve the quality of products.

Main technical character

PXJ-2400 high speed box gluer is a new type of “man-saving, high efficiency” and “excellent performance” box gluer developed by our company on the basis of the changes of domestic and foreign market demand, comprehensive analysis of similar products at home and abroad and in-depth study of processing and manufacturing and production technology. Double-piece gluer.

1. The suction and paper feeding part of this machine adopts double wall plate structure, with linear slider and support guide rail (Rockwell hardness up to 58-62 degrees), stable structure and flexible adjustment. The suction wall plate also adopts plane grinding with machining center processing technology, high precision and good stability.

 2. This machine adopts high-power high-pressure fan in the air suction and paper feeding department, and the air volume is adjustable on the left and right sides. The length of suction time can be adjusted to be the same when doing flat box. When doing shaped box, the suction air feeding time can be automatically adjusted according to the set paper length.

3. This machine is equipped with four sets of servo motors, double servo paper feeding, to ensure the stability of the equipment in the high-speed paper feeding and high-speed paper feeding synchronization, and servo paper feeding allows A and B products to individually set the size of the paper feeding, thus solving the problem of the size of the piece.

4. Two pieces of docking positioning with the use of dual servo with ball screw paper, to the machine in the low-speed bonding and high-speed bonding to provide the consistency of the accuracy of the same.

5. The machine's middle paper conveyor sliding wall plate adopts intelligent one-key adjustment, and can be fine-tuned according to the width of the box piece of paste; the middle paper press mechanism can be used with the product characteristics of the aluminum bracket, the structure of the hair wheel (for the varnished paper), or the steel ball structure (for other products except varnished, no rebound of the flush paper)

6. About the gluing system: the middle gluing adopts double-channel gluing, respectively for hot melt glue and common sealant, to ensure 100% adhesion after the product into the container and cold storage, at the same time the middle gluing system adopts the patented design, according to the size of the product paste mouth fine-tuning; the side cold gluing box adopts synchronous adjustment with the wall plate of the glide, time-saving, no collision phenomenon, other manufacturers are more than just a separate adjustment, time-consuming, easy to load the car when improperly operated; Cold gluing adopts automatic gluing, and has the function of preventing overflow of glue, which can avoid workers forgetting to add glue, and at the same time, it will not add more glue; hot glue heating adopts the unique overall heating plate heating, with a long service life and fast heating. The hot glue is also equipped with pre-melt glue box.

7. This machine can do flat box and shaped box, up and down the front of the position of my company's original, under the front of the gauge using a gauge of dual-use, on the front of the gauge can be adjusted independently before and after the two kinds of manual adjustment and electric adjustment for the transfer of the machine to shorten the time for single.

8. This machine is a dual-purpose machine, double-piece box and single-piece box can be produced, conversion from double-piece box to single-piece box can be completed in just 2 minutes.

Machine technical parameter: