Features:

1. This machine is equipped with a reinforced load-bearing bracket, which is suitable for iron and wood boards, and is also suitable for the shoe industry, leather products industry, stationery industry, belt whole factory equipment and covers, photo frames, sports equipment, etc. It can be freely adjusted to the required thickness.

2. The sealed type runs for a long time, it will not evaporate, it will never solidify, and it will never be as new without cleaning the machine.

3. Fully automatic stepless variable speed control, the speed can be adjusted freely.

4. Both super glue and gasoline glue can be used. It is equipped with a rotary device. When it is stopped, the recyclable glue will never drop glue, and the amount of glue can be adjusted accordingly.

5. This machine is designed with a sealed glass tank, the glue is not easy to volatilize and solidify, which meets the European and American countries' requirements for glue-free glue and environmental protection. The adjustment handle can adjust the amount of glue. It is equipped with a 360-degree rotation device. When the machine is out of use , The glue can be recycled into the glue pot, no glue leakage, easy to operate, easy to clean, and save labor.

How to use and precautions:

1. Confirm that the power supply is 220V before plugging in.

2. Check whether the backplates are fully positioned after anti-twist, and whether the nuts are locked. 3. Attention! When turning on the power, first confirm (whether the speed adjustment button is reset to zero), if the power is turned on before it is reset to zero, the circuit and motor will be burned, and unnecessary loss will be increased.

3. Attention! Be sure to use a 5A fuse. If you use a fuse that exceeds 5A, it will not provide protection and cause the circuit to burn out.

4. Turn the glue bottle to an upright position when working, and an inverted position when resting.

5. Mistakenly touch the rubber wheel to the embossing wheel.

6. When leaving get off work, the glue on the surface of the glue head needs to be wiped clean with white electric oil.

7. When using it again, you need to rotate the handle at the back of the motor by hand to check whether the rubber head is stuck or dry before starting to use.

8. When using, please do not put your hands close to the feeding place.

9. Do not disassemble the rubber head for cleaning.