Laser Power Supply Quality Testing and Aging Test (2)
3 month ago
| Specification | Details |
|---|---|
| Product Model | L60W |
| Rated Application | 60W CO2 laser equipment |
| Input Voltage | AC110V / AC220V |
| Input Frequency | 47–440Hz |
| Maximum Output Voltage | 26kV |
| Maximum Output Current | 24mA |
| Efficiency | 90% |
| Cooling Method | Fan cooling |
| Open-Circuit Protection | Yes |
| Overcurrent Protection | 130% of maximum current |
| High-Level Control Voltage | ≥3V |
| Low-Level Control Voltage | ≤0.7V |
| Dimensions | 175 × 142 × 70mm |
| Working Temperature | −30°C to +65°C |
| Relative Humidity | 20–85% RH, non-condensing |
Selection and Replacement Information
The power rating alone is not enough to determine whether this power supply is suitable for a laser machine.
Before ordering the L60W, please check:
- The rated power and recommended current of the CO2 laser tube.
- Whether the machine requires AC110V or AC220V input.
- The available installation space inside the machine.
- The mounting-hole positions and enclosure dimensions.
- The terminal layout and controller signal type.
- The wiring method of the water protection circuit.
- The specifications shown on the original power supply label.
For replacement applications, sending clear photos of the original power supply label, terminals and connectors can help with model confirmation.
Typical Applications
The L60W power supply can be considered for:
- 60W CO2 laser engraving machines
- 60W CO2 laser cutting machines
- Glass CO2 laser tube systems
- Replacement of a power supply with matching electrical and installation specifications
- Laser machine manufacturing and maintenance applications
Final compatibility must be confirmed according to the laser tube, controller, input voltage and wiring configuration.
Control and Terminal Information
The control terminal includes connections for laser emission control, water protection, signal ground, power control and 5V output.
Both active-high and active-low laser control signals are shown in the supplied wiring diagram. The terminal layout must be checked carefully before installation, especially when replacing a different power supply model.
Do not connect the unit based only on wire color. Follow the terminal labels and the machine’s wiring diagram.
Installation and Safety Notes
This product generates high voltage during operation.
- Installation and testing must be performed by qualified personnel.
- Disconnect the AC input before connecting or changing any wiring.
- Connect the protective ground securely.
- Keep the high-voltage output cable properly insulated.
- Confirm the input voltage before switching on the power.
- Ensure that the cooling fan and ventilation openings are not blocked.
- Do not touch the high-voltage output or laser tube connections while the unit is powered.
- Allow sufficient discharge time before performing maintenance.
- Verify the water protection circuit before enabling laser output.
Why Choose Jinan Zhenyu Electronics
Jinan Zhenyu Electronics Co., Ltd. supplies CO2 laser power supplies for laser machine manufacturing, replacement and maintenance requirements.
To confirm whether the L60W is suitable, customers can provide the laser tube power, input voltage, original power supply model, terminal photos and installation dimensions for comparison.
FAQ
Is the L60W suitable for every 60W CO2 laser tube?
Not necessarily. Compatibility depends on the laser tube’s recommended operating current, input voltage, controller signals, wiring and installation dimensions.
Does the L60W support both 110V and 220V?
AC110V and AC220V options are shown in the product information. The required input-voltage version should be confirmed before ordering.
What are the maximum output specifications?
The supplied parameter image shows a maximum output voltage of 26kV and a maximum output current of 24mA.
Can it replace another 60W laser power supply?
It may be used as a replacement when the electrical specifications, dimensions, mounting positions, connectors and control signals match. Send photos of the original unit before ordering.
Is the external LCD controller included?
The supplied image shows an external LCD controller option, but its standard inclusion has not been confirmed. Please specify whether an external display is required when requesting a quotation.
Inquiry CTA
Need to confirm whether the L60W fits your laser machine?
Send us the following information:
- CO2 laser tube power
- Original power supply model
- Required input voltage
- Photos of the original label and terminals
- Available installation dimensions
- Required quantity
Jinan Zhenyu Electronics Co., Ltd. will help compare the specifications before quotation.
Similar Video Recommendation
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Jinan Zhenyu Electronics Co., Ltd.
- *Message:
-
Submit
Main Product:
CO2 laser power supply for laser engraving machines ,
specialized power supply for laser engraving machines,
CO2 power supply,
CO2 Laser Power Supply,
laser power supply,
high-speed CO2 laser power supply