eutsch 4Pin Male to DC 5.5*2.5 Female Power Extension Cable
2 month ago
Product details
This Deutsch 4Pin to DC5.5*2.5 power conversion cable is a straight-through simple power transfer wiring harness, which adopts concise single-line straight layout, completely different from the multi-branch, PCB built-up complex harness we introduced before, and is specially designed for short-distance vehicle power switching and portable electronic power supply connection scenarios.
As a streamlined finished piece of custom automotive wire harness, this product sets a fixed overall length of 200±10mm, and the transition section from the Deutsch connector to the main cable is precisely controlled at 30±5mm to avoid excessive bending and wire damage during installation. The internal wiring adopts 3-core UL2464 20AWG stranded copper wire, classified into red, yellow and black three independent lines for clear power supply, signal and grounding division, the PVC insulating layer is resistant to high temperature and cold, stably adapting to -40℃~+105℃ complex working environment inside vehicle cabins and mechanical equipment.
| Item | Description |
| Product Name | Deutsch 4Pin Male to DC 5.5*2.5 Female Power Extension Cable |
| Type | Automotive power conversion harness, simple straight-through custom automotive wire harness |
| Voltage | Rated working voltage 12V DC; Withstand voltage test: DC 300V, 10ms impulse test |
| Wire Specification | UL2464 20AWG stranded copper wire, 3 cores (red, yellow, black), full PVC insulation; Temperature range: -40℃ ~ +105℃ |
| Connector Details | P1: Deutsch 4Pin male connector (AT06-4S-RD01 automotive waterproof plug); P2: Nickel-plated DC 5.5*2.5 female barrel connector with yellow strain relief housing |
| Terminal Standard | AW4S crimp terminals, complying with UL 486A-2001 crimp tension standard; tensile load ≥500G, vibration durability test over 1000 cycles |
| Length | Total length: 200±10mm; Connector transition section: 30±5mm |
| Operating Temperature | -40℃ ~ +105℃ |
| Minimum Insulation Resistance | ≥10MΩ |
| Maximum Conduction Resistance | ≤2Ω |
| Compliance Standard | All raw materials meet RoHS environmental protection standard |
| Application Fields | Automotive electronic equipment power supply, vehicle modification power conversion, industrial low-voltage equipment wiring, RV & small machinery power connection, portable vehicle accessories power adapter wiring |
| Specific Shipping Cost | Please Contact Us |
The two ends adopt differentiated professional connector configuration, the upper end is Deutsch 4Pin male waterproof connector matched with automotive-grade PA66+GF shell, equipped with precision crimped AW4S terminals that comply with UL 486A-2001 tension standard, after 1000 times swing tensile testing with 500g load, it will not loose terminals or poor contact under long-term vehicle vibration; the tail is nickel-plated DC 5.5*2.5 female connector wrapped with yellow reinforced strain relief structure, effectively resisting pulling force during plugging and unplugging, which greatly prolongs the service life of the joint. We use thick black heat shrink tubes to wrap the transition position of cable and connector, strengthen sealing and fixation, prevent wire shedding and internal circuit exposure, which is a typical lightweight design for customized electrical harnesses.
Before leaving the factory, each cable will pass rigorous standardized electrical inspection: 100% full conduction screening to eliminate open circuit, short circuit and pin misalignment; DC 300V 10ms withstand voltage impact test is carried out one by one, with insulation resistance controlled above 10MΩ and conduction resistance limited below 2Ω, to guarantee stable and low-loss power transmission. In appearance screening, inspectors strictly exclude burrs, scratches, bubbles and rust defects, ensuring neat and regular appearance of each finished harness.
Compared with multi-channel extended harnesses, this compact customized car wiring harness focuses more on convenient plug-and-play and space-saving installation, with concise structure, fewer fault points and lower application cost. It is widely used in vehicle on-board small electronic accessories power supply, engineering machinery auxiliary equipment power switching, RV low-voltage circuit transfer, outdoor portable equipment power connection and automotive simple modification wiring. The product adopts direct bulk packaging with carton corner protection, convenient for bulk transportation and warehouse storage, and we also support length, wire gauge and connector replacement personalized adjustment according to customer actual usage needs.
Similar Video Recommendation
<
>
Bossgoovideo.com Contact Now
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- Shenzhen Fubang Wire harness Co.,Ltd
- *Message:
-
Submit
Disclaimer :
The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from
transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation.
If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Suppliers
Shenzhen Fubang Wire harness Co.,Ltd
Audited supplier
2 year
Main Product:
OBDII CABLE,
Automotive Cable Assembly,
Automotive Cables,
Automotive Wiring Harness,
Custom Wiring Harness ,
Energy Storage Harness