Automatic cable stripping and cutting
7 month ago
- -40C to +125C rated builds verified in heat-chamber testing before release
- UV-stabilised and sand-resistant jacket options for exposed desert runs
- Project documentation packs for EPC acceptance and handover files
- Samples in 5 to 7 days, mass production in 15 to 25 days
- Volume from 100-piece pilot builds to 50,000 pieces per month
Precision Specifications for Desert Climate Projects
- Thermal reality: in desert installations, conductor temperature is ambient plus resistive heating. A cable rated for 90C conductor temperature in a 45C ambient environment has little margin. Our 125C-rated builds put that margin in, with insulation compounds verified in heat-chamber exposure at the upper rating.
- UV and abrasion: UV-stabilised jacket compounds resist surface cracking under high-index sun, and abrasion-resistant formulations handle wind-driven sand exposure on exposed runs.
- Sealing construction: IP67 builds use gel-filled or overmolded connector seals rather than tape wrapping, verified by immersion testing. Desert sites still get rain events, and condensate inside enclosures is a real ingress path.
- Crimp quality: terminals are crimped on automated presses with pull-force verification per batch. Thermal cycling loosens poor crimps over time; verified pull force prevents that failure mode.
Application Scenarios for Middle East Buyers
Testing and Quality Control Process

Customer Case: From 3.1% Thermal Faults to 0.2% Over Two Summers
- Thermal-related ground fault rate: 3.1% of installed strings down to 0.2% over two summer cycles
- Cable replacement cost per affected string: USD 410 average, eliminated on Chamax builds
- Owner-engineer documentation rejection rate: 9% of submissions down to zero
- Quarterly supplier audit score: 78 up to 94
- Annual warranty and revisit cost: USD 92,000 down to USD 8,500
- Cable specifications moved from temperate-climate assumptions to heat resistant 125C solar cable for desert projects builds, with insulation compounds verified in heat-chamber testing.
- UV-stabilised jacket compounds replaced standard PVC on all exposed runs.
- Per-batch test documentation was restructured for owner-engineer acceptance, eliminating documentation rejections that had delayed payment milestones.
- Transition ran on parallel supply for one project cycle: both vendors shipped simultaneously until three consecutive lots passed their audit threshold. No project commissioning was delayed by the changeover.
Why Choose Us
- 30+ years of OEM/ODM manufacturing depth, certified to ISO 9001:2015 and ISO 14001:2015, with ISO 13485 discipline carried over from our medical cable programmes. Certification documents and test reports are available before you place a trial order.
- An in-house verification lab rather than outsourced testing: laser wire strippers, color line-sequence detectors, cable bending testers, two-dimension measuring instruments and heat chambers. We show Middle East buyers the equipment behind each specification, on video or in person at our Dongguan facility.
Customisation Services
- OEM/ODM engineering starts from your project drawing or single-line diagram. Connector equivalents are confirmed with datasheets before quoting, and programmes spanning cable assemblies and matching new energy cable assemblies are quoted as one project scope. Design revisions during sampling cost nothing extra as long as tooling is unchanged.
- Flexible volume from 100-piece pilot builds to 50,000 pieces per month, with production planned against project schedules rather than just purchase orders. Projects that include monitoring or control boards can add turnkey support from our PCB assemblies team without a second supplier.
After-Sales Service
- Every shipment carries a document pack with CoC, test reports and material declarations. If any unit fails within warranty, we arrange replacement shipment after joint failure analysis, typically resolved within 15 working days. Failed units are analysed with root-cause reports, not just swapped.
- A dedicated account engineer follows each Middle East programme from sample to project handover, with 24-hour response on technical questions. Support hours overlap with Gulf working days for four hours, enough to resolve same-day issues before your site teams leave.
Packaging, Shipping and Trade Terms
- Standard packing: each cable assembly in a PE bag with a traceability label, then export cartons. Project-specific labeling and drum packaging available for site delivery.
- Shipping: samples via DHL, FedEx or UPS door-to-door; mass production by sea freight to Jebel Ali, Dammam or Hamad Port.
- Trade terms: FOB HK standard, EXW and CIF on request. Payment typically 30% deposit by T/T in USD, balance before shipment, with milestone billing available for large project scopes.
- Lead time: samples 5 to 7 days, mass production 15 to 25 days, planned against project commissioning schedules.
How to Order

FAQ
Get Started
- Request a sample evaluation — send your project drawing or single-line diagram, samples ship in 5 to 7 days.
- Get a quotation in 24 hours — email your cable schedule and receive pricing with connector datasheets attached.
- Book a live factory video audit — walk through our testing lab and production lines with your engineering team before you commit.
Similar Video Recommendation
If you are interested in the product, contact Bossgoovideo.com for more information
- *To:
- DONGGUAN CHAMAX TECHNOLOGIES CO., LTD.
- *Message:
-
Submit
Main Product:
Consumer And Communication Cable Assembly ,
Medical And Industrial Cable Assembly,
Wire Harness,
PCB Assembly,
Injection parts,
3C Finished Goods