Sign in
Menu
Sign in

TGB.M20.GLAB 18Pin Medical Cable‌

4 week ago
5 0
Product details
Customized TGB.M20.GLAB 18Pin Medical Cable
 
This Customized TGB.M20.GLAB 18Pin Medical Cable is a purpose-built medical-grade interconnect, not a generic off-the-shelf patch cord. It uses a TGB series M20 GLAB 18-position latching circular connector at one end, paired with a medical-grade multi-core cable and customer-specified opposite termination, so 18 separate signal, power and sense lines can pass reliably between a hospital device and its accessory without unintended disconnection or signal dropout. Because pin assignment, conductor count, jacket material and connector locking style are all project-defined, the finished unit is supplied as a genuine customized M20 18Pin medical wiring harness that fits the exact panel cutout, strain relief and mating profile of the host equipment.
The core design priority is clinical reliability. Inside the assembly, twisted pairs, overall foil-braid coverage and a fully 360° bonded backshell turn a simple bundle of wires into a shielded medical wiring loom that resists EMI from nearby diathermy units, motor drives and radio systems. That level of noise immunity makes this anti-interference medical cable suitable for environments where a single corrupted reading can matter. For system builders who need full signal integrity from port to sensor, the product functions as a customized medical shield cable for device that keeps low-level biopotential and high-speed data lines clean across the full operating temperature range.
Mechanically, the build is made for repeated hospital use. The M20 circular shell latches positively with a light twist, so operators can connect and disconnect quickly without tools, while the cable jacket is formulated to survive isopropyl alcohol wipes, frequent bending, and the mechanical abuse that comes with rolling carts and bedside movement. The same disciplined harness construction used for a car wiring loom, an energy storage system wiring harness or an industrial equipment control harness is carried through here, but tuned to medical materials documentation, biocompatibility and electrical safety rules.
 
Basic Information
Product name:‌ Customized TGB.M20.GLAB 18Pin Medical Cable
Connector A:‌ TGB series M20 GLAB 18-position circular medical connector, push-pull or latching style
Connector B:‌ customer-specified medical, industrial or board-level connector; overmolded or strain-relieved
Pin count:‌ 18 total positions; partial population allowed on request
Conductor:‌ 28–22 AWG stranded tinned copper; twisted pairs for sensitive signal lines
Jacket / insulation:‌ medical-grade PVC, TPE or PUR; biocompatible, wipe-clean and flex-resistant
Shielding:‌ aluminum foil + tinned copper braid; 360° shell termination
Dielectric withstand:‌ rated to medical isolation requirements, tested per assembly
Locking mechanism:‌ positive twist-latch for secure hospital connection
Strain relief:‌ overmolded boot, spring or molded bend limiter
Temperature range:‌ −20 °C to +80 °C
Bending cycles:‌ rated for thousands of routine connect-disconnect cycles
Length:‌ cut to order from 300 mm to 5 m
Testing:‌ 100% continuity, pinout, hipot and shield integrity check
Quality system:‌ produced under ISO 13485:2016 and ISO 9001:2015 process control
MOQ / lead time:‌ small medical prototype batches accepted, scalable to volume production
TGB.M20.GLAB 18Pin Medical Cable‌
Core Features
18-position M20 circular interface in a medical footprint.‌ The TGB.M20.GLAB layout fits standard medical panel openings and delivers 18 usable lines in one compact connector, reducing the number of ports on the device.
Tool-free, positive latching.‌ A short twist locks the connector securely, so it stays seated during patient movement, cart transport and routine clinical workflow.
EMI performance built in, not added on.‌ Twisted pairs and full 360° shielding make this a medical screening signal wire that suppresses interference from nearby electrosurgical units and wireless devices.
Jacket selected for hospital disinfection cycles.‌ Medical-grade TPE or PUR withstands repeated alcohol and common surface disinfectants without cracking or discoloring.
Fully customizable pin mapping.‌ The 18 positions can be split across biopotential lines, low-voltage power, serial communication and status sense lines, all in one harness.
Documentation-ready build.‌ Material traceability, process records and test logs are maintained so the assembly can be referenced in the device master record.
Consistent build discipline across use cases.‌ The same process rigor applied to a car wiring loom, an energy storage system wiring harness and an industrial equipment control harness is extended to this medical product, ensuring mechanical and electrical consistency at scale.
 
Applications
Patient monitoring systems.‌ Connects main units to ECG, SpO2 and auxiliary sensor pods, where reliable low-level signal transmission is critical.
Surgical and therapeutic devices.‌ Used on electrosurgical units, infusion pumps and operating-room accessories where accidental disconnection cannot be tolerated.
Portable diagnostic instruments.‌ Fits handheld ultrasound, compact endoscopes and bedside test analyzers as a compact, field-serviceable interconnect.
Medical carts and mobile workstations.‌ Routes signals between the onboard controller and peripheral modules, built to survive vibration and repeated flexing.
Laboratory and in-vitro diagnostic equipment.‌ Interconnects internal analyzer modules inside clinical chemistry and immunoassay systems.
Rehabilitation and mobility medical equipment.‌ Transfers control and feedback signals in motorized therapeutic devices where safety and mechanical life matter.
 
About Heibok
Shenzhen Heibok Technology Co., Ltd. was founded in 2015 and focuses on the design, production and sales of wires and cables, electronic wiring harnesses, connectors, hardware terminals and plastic components, holding ISO 9001:2015, ISO 13485:2016 and IATF 16949 certification. Project engineers join the customer's design process from the early planning stage, and with more than 20 production lines, 37 harness machines and 19 pieces of high-precision equipment, Heibok supplies competitive customized harness and connector solutions supported by step-by-step process control and "N+1" mandatory inspection from cutting and crimping through to final packaging.
Bossgoovideo.com Contact Now

If you are interested in the product, contact Bossgoovideo.com for more information

*To:
Shenzhen Heibok Technology Co., Ltd.
*Message:
Submit
Disclaimer :
The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Suppliers
Shenzhen Heibok Technology Co., Ltd.
  Audited supplier
4 month


Main Product: wiring harness , connector, cable, customized wiring harness, DB connector loom, energy battery pack wiring harness