Sign in
Menu
Sign in

GT25-8DS-HUR 8P Double-Ended UL1332 22AWG Cable

2 week ago
2 0
Product details
GT25-8DS-HUR 8P Double-Ended Twisted-Pair
 
This double-ended cable assembly is built around the Hirose GT25-8DS-HUR — an 8-position wire-to-board connector with 0.64 mm contact tabs on a 2.2 mm pitch — and finished with UL1332 22AWG FEP-insulated twisted-pair wire crimped at both ends. It gives you a compact, drop-in signal link that stays stable when the surrounding hardware runs hot, vibrates, or sits close to oil and chemicals.
Each unit is a ‌customized GT25-8DS-HUR UL1332 22AWG cable‌ — length, wire colors, twist pitch, shielding, retainers and the mating header are all matched to the host board, so one platform can serve a prototype build and roll straight into repeat production once the design is frozen. Shipped as a complete ‌8P Double-Ended UL1332 22AWG Twisted-Pair‌ assembly, it arrives with both terminations crimped and latched, ready to plug in.
 
Basic Information
Connector: Hirose GT25-8DS-HUR, 8 positions, 2 rows, inline socket housing (plug)
Contact tab size 0.64 mm; pitch 2.2 mm
Rated current 3 A per contact; rated voltage AC 250 V
Operating temperature -40 °C to +105 °C
Wire: UL1332, 22AWG (approx. 0.33 mm²), FEP insulation, twisted pair
Wire temperature rating up to 200 °C (nominal -50 °C to +200 °C)
Construction: double-ended, both ends terminated and latched
Housing insulation: PPE; termination: crimp
Fastening: latch with retainer
Compliance: RoHS
Customization: length, wire color, twist pitch, shielding, connector keying, mating header, packaging
MOQ: made-to-order; sample and small-batch runs available
GT25-8DS-HUR 8P Double-Ended UL1332 22AWG Twisted-Pair
Core Features
Heat, oil and chemical resistance.‌ FEP insulation lets the conductor shrug off high temperature, oil, acids and long-term aging far better than ordinary PVC hook-up wire, which is what makes this assembly work inside sealed or heat-adjacent enclosures.
Twisted pair for clean signals.‌ The two conductors are twisted at a controlled pitch to suppress common-mode noise and crosstalk, keeping paired and differential signals readable over longer runs.
Compact board footprint.‌ With 0.64 mm tabs on a 2.2 mm pitch, the GT25 connector takes noticeably less PCB area than older wire-to-board families.
Secure and serviceable connection.‌ A positive latch gives a clear tactile click on mating, and the joint holds a minimum prying force of 98 N, so vibration will not work it loose.
Ready to install.‌ Both ends are crimped and fitted with retainers before shipping, cutting assembly steps on your line.
Flexible by design.‌ Positions, wire gauge, length and end configuration are all adjustable, and the header mates with equivalent products from other manufacturers.
 
Applications
Automotive electronics.‌ In the cabin, this assembly links IVI and navigation units, instrument clusters, cameras, speakers and microphones, HUDs, electronic mirrors and interior lighting. On the driver-assistance side it connects radar, LiDAR and domain controllers, and it also serves TCU/gateway modules and on-board chargers. Wherever a vehicle needs a short, heat-resistant signal run, it works as a car wiring loom.
Energy storage.‌ With matching terminations, the same build is used as an energy storage system wiring harness for BMS sampling lines, PCS control signals and rack-to-rack communication inside battery cabinets and containers.
Industrial equipment.‌ As an industrial equipment control harness, it carries sensor, encoder and control-panel signals on machines exposed to heat, oil mist or continuous vibration.
Other high-reliability electronics.‌ Medical devices, communication equipment and test benches where a stable, long-life connection matters more than unit cost.
 
Working With Heibok
Whether you need a single OEM car wiring harness program, a small custom auto wiring kit for a pilot line, or a full ODM automobile wiring assembly with design support from the drawing stage, the workflow is the same: send the drawing or the sample, we confirm connector, wire and termination, then quote and build.
About Heibok.‌ Shenzhen Heibok Technology Co., Ltd. is a wire harness and connector manufacturer based in Guangming District, Shenzhen, established in 2015. We design and produce cables, electronic wire harnesses, connectors, metal terminals and plastic parts, backed by ISO9001:2015, ISO13485:2016 and IATF 16949 certification. Our parts go into industrial equipment, medical devices, communication systems, new energy and energy storage, and automotive electronics, and we support customers from sample and drawing through to volume production.
Bossgoovideo.com Contact Now

If you are interested in the product, contact Bossgoovideo.com for more information

*To:
Shenzhen Heibok Technology Co., Ltd.
*Message:
Submit
Disclaimer :
The information of Bossgoovideo.com limited shown above is provided by the user or collected on the network. Video 2B does not guarantee the authenticity,accuracy and legitimacy of Bossgoovideo.com limited information. Video 2B does not involve legal relationships and disputes between users arising from transactions other than secured transactions on this website. Disputes shall be settled by you through negotiation. If you are the person in charge or relevant employee of this enterprise, if you find that the enterprise information is incorrect or want to manage thiscompany, please contact us jacklee1558@gmail.com, after you claim the enterprise, you can obtain management permission, publish supplyand demand information, bring consulting orders, and remove page advertisements.
Suppliers
Shenzhen Heibok Technology Co., Ltd.
  Audited supplier
4 month


Main Product: wiring harness, connector , cable, customized wiring harness, DB connector loom, energy battery pack wiring harness