Automotive Cable Assembly 2-Pin Spade Harness
TE AMP 2-Pin Connector with 6.35mm Spade Terminals
This Automotive Cable Assembly 2-Pin Spade Harness connects a TE AMP 2Pin Multi-Lock male connector to two 6.35mm male quick disconnect spade terminals. This combination gives the cable two different connection styles, making it useful for automotive electrical setups where a plug connection is needed at one end and a quick terminal connection at the other. The green and brown wires also make it easier to distinguish the two conductors during installation.
The 2-Pin Connector to Spade Terminal Harness is designed for customers who need this particular connector combination in a compact wiring assembly. The TE AMP connector uses a PA66 automotive-grade housing, while the terminals are made from tin-plated brass. If you're sourcing an Automotive spade pigtail harness, check the connector layout and terminal size against your equipment before ordering. This helps avoid problems caused by mismatched plugs or connection points.
16AWG UL1569 Wire for Automotive Electrical Use
The harness uses UL1569 wire with a 16AWG conductor size and an outer diameter of 2.4mm. Its green and brown color combination gives installers a clear visual reference when routing and connecting the wires. With a cable length of 163mm, this assembly is suited to short-distance connections where a longer wire could leave unnecessary slack around the installation area.
The wire is rated for a working temperature of -40°C to +105°C and carries a VW-1 flame classification. Its terminals use tin-plated brass, while the listed minimum insulation resistance is ≥10MΩ and maximum conduction resistance is ≤3Ω. The stated test voltage is DC 500V 10MS. These details are useful when comparing a 2-pin spade terminal cable with your project's electrical and installation requirements. Please confirm the exact test conditions with the supplier if you need to reference the voltage specification in your own documentation.
For Vehicle Signal Connections and Low-Voltage Wiring
This pigtail harness is intended for automotive signal connections, vehicle electrical modifications, and low-voltage auxiliary equipment wiring. Its combination of a two-pin plug and quick disconnect terminals can suit projects where the existing wiring needs to connect with a spade-terminal interface. The short cable length also makes it worth considering for installations with limited space.
When a project calls for a different wire length, connector combination, or terminal style, a custom cable assembly may be a better fit than a standard lead. FBXSlink also works with customers on custom cable assembly and wiring harness requirements. For other product categories, visitors can explore custom cables for pc, cable assembly PC, and custom cable assembly kit to review related cable options.
| Type |
Automotive Signal Pigtail Wiring Harness |
| Connector A (P1) |
TE AMP 2Pin Multi-Lock Male Connector |
| Terminal (P2) |
6.35mm Male Quick Disconnect Spade Terminals |
| Wire Specification |
UL1569, 16AWG, OD 2.4mm |
| Wire Color |
Green, Brown |
| Working Temperature |
-40°C ~ +105°C |
| Flame Class |
VW-1 |
| Cable Length |
163mm |
| Pins Material |
Tin-Plated Brass |
| Plug Material |
PA66 Automotive Grade Connector Housing |
| Test Voltage |
DC 500V 10MS |
| Minimum Insulation Resistance |
≥10MΩ |
| Maximum Conduction Resistance |
≤3Ω |
| Application Fields |
Automotive signal connection, vehicle electrical modification, low-voltage auxiliary equipment wiring |
| Specific Shipping Cost |
Please Contact Us |
Why Choose FBXSlink?
The useful detail in this harness is the combination of a TE AMP plug and 6.35mm quick disconnect terminals. Instead of using the same connector at both ends, this layout gives the installer a plug-in connection on one side and a spade-terminal connection on the other. The green and brown wires, along with the compact 163mm length, also give the assembly a clear place in short automotive wiring jobs.
FBXSlink has been making automotive and industrial wiring products since 2013. Our work covers more than standard connector cables, including automotive diagnostic connections and custom wiring assemblies. For this type of pigtail, we can review the requested wire gauge, terminal size, connector model, and cable length against the customer's drawings or sample. That way, the discussion stays focused on the actual installation instead of offering a generic cable that may not fit.