monel 400.mp4

Food Grade Monel400 1.4462 Polish Rods

 

Material	Monel 400 405 k500 600 Nickel Alloy Tube Pipe Plate Bar
Shape	Bar,Pipe/tube,sheet/plate,Forging,Ring,Coil,Flange,Ribbon,Square pipe/bar,product processing
Grade	Duplex: 2205(UNS S31803/S32205),2507(UNS S32750),UNS S32760(Zeron 100),2304,904L
	Hastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etc
	Inconel 600/601/602CA/617/625/713/718/738/X-750;ETC
	Incoloy: Incoloy 800/800H/800HT/825/925/926;etc
	GH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etc
	Monel: Monel 400/K500/R405,etc
	Nitronic: Nitronic 40/50/60;etc
	Nimonic: Nimonic 75/80A/90/A263 ;etc
Specification	Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm  Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm
Product  Characteristics	1.According to the preparation process can be divided into deformation superalloys,  casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation  strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc..
Inspection	ISO,SGS,BV and so on.
Packaging	All our products are packed, stored, transported according to the international regulation.Or as customer's requirement provide special packing.

monel 400

Applications:   Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

Features:

• Resistant to seawater and steam at high temperatures
• Excellent resistance to rapidly flowing brackish water or seawater
• Excellent resistance to stress corrosion cracking in most freshwaters
• Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
• Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
• Excellent resistance to neutral and alkaline salt
• Resistance to chloride induced stress corrosion cracking
• Good mechanical properties from sub-zero temperatures up to 1020° F
• High resistance to alkalis