Crystal Epoxy Mold Use DIY Crafts resin

Precautions for use

1. We recommend that the resin glue should not be mixed too much at one time, otherwise it will easily heat up and 

solidify quickly, resulting in bubbles and yellowing (increase or decrease according to the temperature).

2. All resin glues have a slight smell, our epoxy resin has a very low smell
3. This glue is AB mixed glue and needs to be used in strict accordance with the proportion.
4. Glue needs to be stored in the dark and away from direct sunlight. The shelf life of glue is 12 months.
5. Each type of resin glue has different properties. Please understand the operating procedures or consult customer 

service before purchasing.

Agent A and Agent B have different densities. The colloid will be turbid and opaque at the beginning of AB mixing and 

stirring. It should be stirred in the same direction at a uniform speed to minimize the generation of air bubbles. After the 

colloid is uniformly stirred at a uniform speed, AB will be fully mixed and completely clear without any drawing refraction. 

Pay special attention to the edges and bottom of the container to avoid uneven colloid residues. If necessary, it is recommended 

to replace the container a second time to adjust the glue.

Initial curing takes 7-24 hours; after curing for 24-72 hours, grinding, polishing, and engraving can be performed 

(temperature, thickness, and heat dissipation conditions will directly affect the curing time); maximum strength 3-5 days.