Transparent Slow Drying Epoxy Resin For River Table

DILI brand river table resin glue, transparent epoxy resin glue, crystal drop glue, wood handicraft glue, can be polished 

after 24-72 hours, one-time pouring and one-time production can save 3 times of process time.

We have been focusing on independent research and development and production of high-quality adhesives, mainly 

supplying high-end and high-end markets. We have a professional technical research and development team and production 

capacity, and can provide OEM/ODM OEM customization services for customers around the world.

DILI brand river table resin glue uses imported raw materials with stable quality. A single pouring is 5CM+. It will 

not explode after mixing and heating. It can be poured and molded in one time, saving a lot of time.

How to use epoxy resin:
1. Place the glue container on the electronic scale, then open the electronic scale and reset it to zero to prepare for glue mixing.
2. Add glue A and glue B into the container according to the weight ratio (A3:B1), and be as accurate as possible.
3. Stir the mixed glue evenly until there is no silk
4. Adding pigments with good oil compatibility. Fluid pigments should use pearlescent powder, sequins, etc., remember not 

to use water-based pigments
5. After stirring, let the glue flow into the mold as gently as possible, which can reduce the air bubbles
6. Wait for natural curing.

Here are the dos and don'ts for you with epoxy:

1. Epoxy resin should not be mixed too much at one time, otherwise it will heat up and solidify quickly, resulting 

in bubbles and yellowing! (Appropriate increase or decrease according to the temperature)
2. All resins have a slight smell, and the smell of our epoxy glue is mild.
3. After the resin is fully cured, the volume will shrink a little, and there will be a slight depression in the middle.

It is recommended to make up the glue again! Or polish!
4. Please pour the resin glue adjusted according to the proportion into the mold as soon as possible, and do not

place a mixing container on the surface, keep it still and wait for it to solidify.
5. A small number of people may be allergic to glue, so it is recommended to wear gloves.