Sodium Naphthalene Sulphonate.mp4

Sodium Naphthalene Sulfonate Concrete Admixture

1. Without changing the ratio of various raw materials, adding high-efficiency concrete water-reducing agent not only changes the strength of the concrete, but also greatly improves the rheology and plasticity of the concrete. Construction will be carried out in other ways to increase construction speed and reduce construction energy consumption.

2. Without changing the ratio of various raw materials (water removal) and the slump of the concrete, reducing the amount of water can greatly improve the strength of the concrete. The early strength and the later strength are respectively better than the concrete without water reducing agent. Increase by more than 60% and more than 20%. By reducing water, high-strength concrete with C100 grade can be poured.

3. Without changing the ratio of various raw materials (except cement) and the strength of concrete, the amount of cement can be reduced, and a concrete water reducing agent with a cement quality of 0.2% to 0.5% can be added to save 15 to 30% of cement. %the above.

4. Adding concrete high-efficiency water-reducing agent can increase the life of concrete more than double, even if the normal service life of the building is extended more than double.

Usage:

It can be used together with anionic and nonionic surface active agents. It is resistant to acid, alkali, hard water, salt, diffusing and protective colloid, and has no paint penetration and foaming. It has affinity for protein and nylon fiber and has no affinity for cotton and linen fiber.

In order to prepare large flow enthalpy, existing cast-in-place concrete and prefabricated components with early strength and high strength requirements have good effects, can comprehensively improve and improve various properties of concrete, and are widely used in roads, bridges, dams, ports. Terminals, tunnels, electricity, water and civil engineering construction, steam and nature protection prefabricated components.

The superplasticizer has a strong dispersing effect on the cement, which can greatly improve the fluidity of the cement mixture and the slump of the concrete, and at the same time greatly reduce the water consumption and significantly improve the workability of the concrete. However, some high-efficiency water reducers will accelerate the loss of concrete slump, and if the amount is too large, it will bleed. The high-efficiency water reducing agent does not change the concrete setting time substantially. When the dosage is large (over-dosing), it has a slight retarding effect, but does not delay the early strength growth of the hardened concrete.
It can greatly reduce the amount of water and significantly increase the strength of concrete at various ages. When the strength is kept constant, cement can be saved by 10% or more.
The chloride ion content is small and does not cause rust on the steel. It can enhance the impermeability, freeze-thaw resistance and corrosion resistance of concrete and improve the durability of concrete.

Applications

–It is suitable for prefabricated and cast-in-place reinforced concrete in various industrial and civil construction, water conservancy, transportation, port, municipal and other projects.

Suitable for high-strength, ultra-high-strength and medium-strength concrete, as well as early-strength, moderately anti-freeze, and large-flow concrete.

Precast concrete components suitable for steam curing processes.

–It is suitable for the water-reducing reinforcing component (ie, masterbatch) of various composite admixtures.

Main technical indicators:

1. Appearance: powder brown powder.

2, solid content: powder ≥ 94%

3. The liquidity of the pulp is ≥230mm.

4. The sodium sulfate content is ≤10.

5. Chloride ion content ≤0.5%.

Dosage range:

Powder: 0.75-1.5%; Liquid: 1.5-2.5%.

Performance

1. When the strength and slump of the crucible are basically the same, the amount of cement can be reduced by 10-25%.
2. When the water-cement ratio is constant, the initial slump of concrete is increased by more than 10cm, and the water-reducing rate can reach 15-25%.
3. There is a significant early strength and enhancement effect on cockroaches, and the strength increase is 20-60%.
4. Improve the workability of concrete and comprehensively improve the physical and mechanical properties of concrete.
5. It has good adaptability to various cements and is compatible with other types of concrete admixtures.
6. It is especially suitable for use in the following concrete projects: fluid concrete, plasticized concrete, steamed concrete, impervious concrete, waterproof concrete, natural curing precast concrete, steel and prestressed reinforced concrete, high strength ultra high strength concrete .
7. The slump of concrete has a large loss over time, and the slump loss in the half hour is nearly 40%.

Packaging and storage

1. Package：25kg/bag

2. Storage: This product needs to be placed in a dry and ventilated place, and should be protected from sun, moisture and moisture. This product does not deteriorate for long-term storage. If there is agglomeration, it can be used as an aqueous solution or crushed, without affecting the performance and effect

3. Transportation: This product should be lightly loaded and unloaded during transportation. It is forbidden to use iron hooks for loading and unloading to prevent damage. The product is non-toxic and harmless. It is a non-flammable and explosive dangerous product. It can be transported by containers such as cars or trains or LTL.

Our Company

Shenyang East Chemical Technology Co., Ltd., established in 2012, is a professional supplier of concrete admixture products. Our company relies on high-quality and rich resources in the Northeast and mainly sells the first, second, and third generation water reducers, lignin sulfonates, naphthalene-based superplasticizers, polycarboxylic acid water reducers, polyether monomers (HPEG, TPEG), and polycarboxylic acids water reducing agent (PCE) series products and other concrete admixture auxiliary materials, such as sodium gluconate, acrylic acid, citric acid, etc Our company's products are exported to all parts of the country and Southeast Asia, the Middle East, Europe and other international markets Our company has established a comprehensive sales and service network system throughout the country, and we have many branches and foreign trade transit warehouse in Shenyang, Wuxi, Shandong and so on We committed to being a sincere and trustworthy partner of our customers adhering to the company culture of "customer first, professional and efficient" . We are willing to work with friends at home and abroad to create a better future and achieve win-win cooperation.