CA50MM.mp4

CA50MM Full Immersion Pulse Jet Valve 2'' AC220V

The role of dust collector valve in bag filters: The cleaning process of the bag filter is to cut off the clean air outlet duct of the chamber, so that the bag of the room is in a state of no airflow (the compartment is shut off and cleaned). Then, the pulse jet valve is opened and the pulsed air is cleaned by the compressed air. The closing time of the shut-off valve is enough to ensure that the dust peeled off from the filter bag after the spray is settled to the ash hopper, and the dust is prevented from being separated from the air bag after being separated from the surface of the filter bag. The phenomenon of the adjacent filter bag surface makes the filter bag clear, and the exhaust valve, pulse jet valve and ash discharge valve are fully controlled by the programmable controller.

Overall Dimension of CA50MM Manifold Mount Dust Collector Valve:

Details enlargement of CA50MM Full Immersion Dust Collector Valve:

Tips: All related accessories are also sold, like Pulse Controller, Diaphragm Repair Kit, Solenoid Valve Coil and Solenoid Valve Armature Assembly.

Technical data of MM Series Full Immersion Manifold Flat Mount Dust Collector Valve:

Typical Application of Dust Collector Valve:
1. Coal fired boiler dust collectors for power station applications.
2. Process and kiln collectors in cement plants.
3. Long filter or pleated filter bag technology, ideal for high pressure pulsing of 8m and larger filter bags. Equally suitable for high cloth areas of pleated filter bags.
4. Low pressure pulsing applications. The 25% increase in flow capacity will allow lower cleaning system tank pressures than previously achieved in like for like applications.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!