e0c741ff1cf0a9ad3a7c2d4aa4eb5c8f_raw

The CK61100 CNC Lathe adopts a horizontal flat bed structure with a whole cast structure, and the base parts such as the bed, head, bed saddle, and bed leg are all cast with resin sand, and artificial aging treatment is adopted, which makes the whole machine stable. The bed rail adopts hard rail, and the bed saddle adopts "plastic" treatment. The moving parts can achieve micron feed to prevent crawling. The feed system adopts servo motor, precision ball screw, high rigidity precision composite bearing structure, accurate positioning and high transmission efficiency. The spindle hole diameter is 105mm, with high rotational speed, wide speed range, and low noise of the whole machine. The main drive three-speed variable frequency motor realizes continuous speed adjustment within the gear.

General specifications: Model CK61100 The maximum turning diameter of the workpiece on the bed is 1000mm The maximum turning diameter of workpiece on the spindle is 585mm The maximum length of the workpiece with two centers mm 900/1,500/2,000/3,000/4,000/5,000 spindle guide rail width and super-high frequency quenching hardness 600mm HRC 46-52 / HRC 46 -55 Two sharp allow to support maximum workpiece weight 2,500kg The maximum allowable weight of the workpiece is 1200 kg. 2. The spindle box: the distance between the center of the spindle and the height of the bed is 460 mm, the diameter of the spindle hole is 105 mm, the length of the spindle box is 850 mm above and 900 mm below, the spindle end code is C11, the diameter and taper of the spindle front cone are metric 120 mm. 1:20 Main spindle speed range (mechanical three-speed) 130-330-900 r/min Main spindle speed range(variable frequency) 25-90 r/min.