H-TC3040LP Flying disc hot stamping machine

Usage- printed Samples

       There will be huge pressure when the hot plate and the worktable are in contact, which is a potential safety hazard for all hot stamping machines. In order to improve the safety of the hot stamping machine, you can install a safety door, install a safety grating, and use a two-button operation mode. Another important practice is to set the workbench to enter and exit automatically. The workbench enters and exits automatically, which can facilitate the pick-and-place of the product and avoid the safety failure of the operator.
        The automatic entry and exit of the workbench is also convenient for the operator to observe the product placement, which is more conducive to product positioning. The complete solution to the safety problem of the semi-automatic plane hot stamping machine is to use a fully automatic hot stamping machine, that is, automatic feeding, automatic hot stamping, and automatic unloading, which completely eliminates the possibility of the operator touching the hot plate and the workbench. However, during the debugging process of the machine, this kind of contact is still unavoidable, and it is necessary to carry out the necessary safety training for the operator.

Catalogue

Maintenance and care:

Cleaning

Regularly clean the machine heating plate, hot stamping mold, hot stamping foil residue, paper scraps, etc. on the workbench.

Mechanical parts maintenance

The sliding joint surface of the workbench, the lifting screw, the chain of the hot stamping foil winding device, the sprocket, and the sliding joint surface of the hot stamping plate should be regularly added with an appropriate amount of lubricant to reduce friction and wear.

Heating system maintenance

• Thermocouple inspection: Thermocouples are key components for controlling the hot stamping temperature. Regularly check whether the thermocouple sensor is working properly to ensure that the displayed temperature matches the actual temperature.

• Heating plate maintenance: The surface of the heating plate should be kept flat and clean, avoid hitting the heating plate with heavy objects, and regularly clean the dirt on the heating plate.

Electrical system maintenance

• Circuit inspection: Regularly check the electrical circuit of the machine to check whether the wires are damaged, aged, loose joints, etc., to prevent electrical faults such as short circuits and leakage.

• Electrical component maintenance: Regular maintenance of electrical components such as contactors, relays, thermostats, winding motors, limit switches, etc.

Detail -advantage