M swing saw 111

The BT•POWER Medical Oscillating Saw and accessories of cannulated drill machine,perform cutting of soft tissue and bone.The fields of application include orthopedic, arthroscopic, hand and foot surgical procedures.

The BT•POWER cannulated bone drill hand-pieces are designed for sawing in large and transverse or longitudinal bone osteotomies,removal of the femoral head and neck, removal of the greater trochanter, repeat sternotomies,resurfacing the tibial plateau, and the distal end of the femur as required in total knee or total hiparthroplasties.

1. Blade Locking Collet — Holds and locks the blade in place.

2. Rotating Head — The rotating head gives the surgeon the ability to position the cutting blade for appropriate surgical access. The oscillator handpiece contains an 8 position, 45° indexing head. To position the rotating head, grasp the rotating head, pull it out from the handpiece body, and turn it to the desired position.

NOTE: Mode lever is to be in the “safe” position when positioning head.

3. Blade Locking Knob — Rotate to the “open” position to insert a blade. Rotate in the opposite direction to lock the blade securely in place.

4. Activation Trigger — Used to activate the handpiece. Depress when the mode lever is in the run position to operate the handpiece.

5. Mode Lever — To operate the handpiece, place in the run position. Place in the safe position prior to connecting or removing an accessory and during non-use of the handpiece.

6. Battery Receptacle — The battery attaches here.

7. Battery Release Lever — Depress this lever to remove the battery from the handpiece.

The BT•POWER Oscillating Orthopedic Saw can be used with oscillating blade.These Surgical Bone Saw blades are 12.5*70*1mm, 19.5*90*1mm, 25.0*90*1mm, 12.5*70*1.2mm, 19.5*90*1.2mm, 25.0*90*1.2mm.