Fake nails pad printer

        The ink cup pad printer is a more environmentally friendly pad printer, which seals the ink in the oil cup. Compared with the oil pan pad printer, the printing area of ​​the oil cup pad printer is smaller, mainly because the size of the oil cup will limit the printed pattern.

    Another problem is that the movement direction of the oil cup also affects the printed pattern. The pad printer with the oil cup moving forward and backward is the most common pad printer, but it is difficult to print products with long patterns due to the forward and backward travel of the pad printer. So when the product is long, choosing a pad printer with the oil cup moving left and right has obvious advantages.

1) The width of the pad printer will become smaller, and the pad printer will be more convenient to adjust;

2) The size of the steel plate can be significantly lengthened when the oil cup moves left and right, and the length of the printed pattern can also be greatly increased.

3) The oil cup and steel plate are closer to the operator, and the replacement of ink and steel plate will be easier.

Samples effects

Details-function

• Sealed cup move from right to left and fit for printing long objects;
• Using the dimensional modulating table, can be up and down, front, left, and rotation of the adjustment, which will help precise printing;
• T-slot structure, easy installation of fixtures and products;
• Microcomputer program control, the movement is more accurate and reliable;
• Test machine can be a single action adjustment, adjustment is completed, you can use the automatic mode of operation;
• Structure using die-casting aluminum, lightweight and solid.
• Independent Rubber pad up and down stroke and speed adjustment function;
• Sealed cup ink system, ink savings, and also to prevent the ink in the VOC emission into the air pollution of the environment, health protection of operating personnel;
• Sealed cup glide independent driving cylinder Blade pressure and Ink Removing Completely;
• Either use the tungsten steel ring, you can use a ceramic ring, and easy to replace;
• Temporary shutdown can prevent the ink to dry within the Sealed cup with INK function;
• World famous pneumatic components to ensure the long service life of machine;
• Rubber sliding shaft with hardened guide shaft grinding of high hardness, good abrasion resistance.

 Characteristics

High precision: The high-precision sealed ink cup transfer printer is known for its excellent printing accuracy, ensuring the clarity and accuracy of printed patterns or text.

Sealed Ink Cup: This device adopts a sealed ink cup design, effectively preventing ink evaporation and contamination, while ensuring stable ink supply, improving printing quality and efficiency.

Stability: The high-precision sealed ink cup transfer printer focuses on stability in its structure and design, and can maintain stable printing effects during long-term continuous printing processes.

Usability: The device is usually equipped with an intuitive operating interface and simple operation steps, making it easy for operators to get started and reducing the difficulty of operation.

Plastic frames suitable for pad printing

Plastic frames have large dimensions and complex surface conditions. Silk screen printers and hot stamping machines are more commonly used, while pad printing machines are less commonly used. However, pad printing machines are also used in some occasions.

1) Small printing area

In order to increase the strength of the plastic frame, a reinforcing rib structure or a mesh structure will be set on the surface. Some recessed areas are small, and it is difficult for the silk screen frame to sink and contact them. Therefore, a pad printing machine is needed. Pad printing machines are good at printing in small areas.

2) Uneven printing area

Due to defects in the injection molding process or the shrinkage of the plastic itself, the printing area is not very flat and the screen is difficult to approach. The rubber head of the pad printing machine is soft and can contact the surface of the product through deformation. In this case, a pad printing machine can also be used.

3) Scattered printing area

If the area to be printed on the plastic frame is located in different recesses, the silk screen printer cannot print it at all. It can only be achieved by combining a pad printing machine with a shuttle device.

What problems should be paid attention to when printing frames with a pad printing machine?

1. Material

Most frames are made of polyolefin materials. Plastics with low surface tension such as polypropylene (PP) and polyethylene (PE) need to be treated with corona and flame in advance to improve ink adhesion.

2. Surface condition

The printing area should be as flat as possible to avoid lines or burrs. The surface should be free of mold release agents, dust and other impurities, otherwise it will affect ink adhesion.

3. Fixture

The size of the plastic frame is large. When making the fixture, the printing area should be as close to the printing rubber head as possible. If the printing area is scattered, a pad printer that can move or flip automatically can be made. The pad printer should be a type that scrapes horizontally with an oil cup, which is more convenient.