3.14 car lamp welder

The application range of ultrasonic plastic welding machine is extremely wide, and it are often utilized in the car industry, household appliance industry, industry and toy business . the dimensions of the products it welds is little and medium, like charger boxes, Barbie dolls and toy cars. The welding work of the Plastic Ultrasonic Welding Machine is fast, and therefore the welding products are of top quality . The ultrasonic  welding machine also can weld car lights.
Before using the  plastic ultrasonic welding machine to weld the car lights, you ought to select the acceptable welding head and base film consistent with the model of the car light.
Then lock the welding head screws on the welding head of the ultrasonic plastic welding machine, rotate the lifting hand wheel of the machine, and lift the machine to a correct position about 300 mm high from the joint surface, then tighten the four horizontal adjustment screws of the welding head. The expansion cone is fixed at the center position of its rotation range until the welding head is screwed by hand until it cannot rotate.

Secondly, adjust rock bottom mold and welding horn of the ultrasonic plastic welding machine, activate the atmospheric pressure source, adjust the pressure to 2kg/cm, and place rock bottom mold steadily on rock bottom bed during a more convenient operation direction. Turn the machine lifting handwheel to 100 mm below the working surface of the welding head, activate the most power turn on the vibrating box, and set the selector on the ultrasonic plastic welding machine to the manual position.
Adjust the welding head of the ultrasonic plastic welding machine, loosen the four horizontal adjustment screws, align the welding head position with the workpiece, turn the machine lifting hand wheel, press the welding head to the workpiece, adjust the position of rock bottom mold, and make the welding head match the workpiece then , fix four horizontal screws on the average , fix rock bottom mold again, and switch the machine lifting hand wheel to lower the machine to the position of the welding machine, and await welding.
Finally steel oneself against welding, manually select the switch position of the ultrasonic plastic welding machine, press the up and down button on rock bottom bed, check the welding situation, set the descending speed and dealing pressure, adjust until there's no noise when lifting, and set the welding time. After debugging, you'll formally use the ultrasonic plastic welding machine for welding production work.